开云体育

Looking for the easiest/best compatible TV Lift/Elevator brand that's compatible with Crestron and Crestron Home. Thanks!

Chris, I don't know if they are related at all, but ... I have still been having issues with EISC connections between 3 and 4 series processors. That is with the 2.7000.00040 firmware installed on the

Thanks, Jonathan, Brian and All, It definitely seems like a highly intermittent issue, might even be a one-off sometimes. I'll be connecting into the site that I've had this issue with and will see if

I've seen this as well. I have a case open with TB right now for it. What I was able to narrow it down to was if you lose link on the CS side of the processor that is what breaks the TCP/IP client. I

I've seen this since the very first CP4N we installed right after they came out, and your experience sounds a lot like mine. In S+, you can leave it to stay connected and automatically reconnect and

?FTR, I almost never turn the connect off with any device and have not had any particular issues until now...“ Same here. Especially in my home/test-system, i?ve got a lot of TCP Clients in the

Hi, I have a Crestron Home system and a DMP (XR 150/500) alarm. I understand that a full integration of the DMP system into Crestron seems not possible but is there a way to just have the alarm status

Olivier, Yeah, I'm not sure why I have a '1' on it (probably some legacy thinking...) at minimum, I usually make it an actual signal, that is driven by a '1', thru a buffer, so that I can at least

I never use "1" on a TCPIP client module, I always use a connection manager to connect to the device when needed and close the connection after. This can be as short as a few milliseconds to send a

OLH: 1001189, or just search online help for Masters. September 20-22, registration opens June 15th

A big shout out to Crestron_Programmer_84 for all his help!? The problem was resolved by turning off Spanning Tree Protocol the VLAN that is used for the NVX and other things being controlled.?

has the date been released yet?

Yeah, It definitely seems very intermittent, as I at least have not seen it before... In this case, I don't believe that the Vantage system was off-line at all (certainly not for hours/days) so it

I’ve seen an issue on my home system (PRO4) a couple times but not with enough frequency to get enough info for a proper bug report where if the Ethernet link is lost under some circumstances the

Hi All, Wondering if others have seen this odd, intermittent behavior...and also a heads-up for others to watch out for it CP4 (v2.7000.00040) has a TCP client communicating with a Vantage System

It’s not as elegant (or rack mountable) but I think some multiple of PW-5430DUS is your answer https://www.crestron.com/Products/Accessory/Power-Supplies/Power-Packs/PW-5430DUS -- Lincoln

Anyone have any suggestions for a replacement device that will supply PoDM+ power to all ports on a 64x64 blade? Are we out of luck and stuck powering everything with wall warts? -JRW

Hi All, Does anyone know where I can find configuration software for this unit? (bosch dcn ccub-ul) Thank you

Scott, I am currently using these module without any issues. Can you post a snippet of the Fader (one with issues) and Core module?

Thanks for the response and I was able to get this to work. Next: I am reading an XML document, converting to JSON (this works) and placing in a <List> but not certain how to get the list back to