开云体育

Thanks, Javier - i‘ll have a look Von meinem iPhone gesendet

Hi Joda, Sorry I should have added the client has a NUC and Tap in use already. He basically wants to add the control page with Display Power and Video Selection via the DMPS3-350

Hi, The Logitech Tap is basically an IP display and does not run Teams or anything like that on itself. You would need a PC with Teams Rooms running for the Tap to connect to. In the end it has to be

Hi Matt, That’d be amazing if you could…really appreciate the help

Hi John, I’ve never actually seen this product, looks interesting though. I think the lead times is the problem as to why he wants to use the gear he has if it’s possible

Based on the New Jersey legislature’s bill information for the proposed act (https://www.njleg.state.nj.us/bill-search/2022/A1538) it doesn’t look like it’s even made it out of committee, let

Yes, you can setup a TCP server on the Crestron processor and then setup a script on the tap to do a TCP client connection, this would be using the tap as a zoom controller anyway. I've done it, it

This bill, to be known and cited as the "Fair Repair Act," establishes fair repair practices for digital electronic equipment, such as mobile phones, tablets, and other common consumer electronic

It applies to electronics as well, and will repaste that passage [email protected]> wrote:

According to this manual: https://tascam.com/downloads/products/tascam/bd-mp4k/rs232c_ethernet_protocol_bd-mp4k_v101_en.pdf Slow/Search (or rewind fast forward) would be !7SCN *ds* where *d* is either

Does that bill apply to home AV systems? The article you attached shows it applies to cars. That would explain why TB denied you.

Authorized repair provider" means a person having an arrangement for a definite or indefinite period in which an original equipment manufacturer grants the use of a trade name, service mark, or

As a Previous Dealer Employee doing no commercial work but some system enhancements to what I Own... over a number of system changes, I lack access to updated Dev Tools, and TB Denied my Access.. a

So I've been developing some code for TSW1060 running an HTML project. Using namely these packages: * Angular version 12.2 (version 13 doesn't draw correctly for some reason I am not an expert enough

Hi Thorsten, Check Vogel's?PTA 3103, I used with some VESA 100x100 displays for tabletop. Regards.

Is it HDMI video and USB touch out? You can run it into a DGE-100

Hi, Does anyone know if it's possible to use a Logitech Tap with a Crestron Processor? The customer has a DMPS3-350 with quite a few sources and wants a Logitech Tap as his touch panel with a Room

Haven’t tested myself, but this Roland scaler looks promising. Supports a lot of high refresh rates. https://proav.roland.com/global/products/vc-100uhd/

A Barco imagePRO-4K would take a 120Hz input. But when converting to 60Hz , it will just skip frames, no interpolation done. ...high frame rate in general, 120Hz is recently used in the professional

Hi, a client wants to change three TS-1542 wall mounted panels into table top panels. According to my sales rep, there?s no specific table top kit available for the TS-1542. So i?m asking the group