开云体育

My Crestron is in a fire rebuild house. The last six months has involved lots of house finishing and customization. I only accidentally was able to work on this problem yesterday, it being lower

Being in the VJ/ lighting community i dont understand why you cannot connect this as artnet over ip or use osc for triggers wrote:

That product has both a DMX OUT for control and a DMX IN for receiving channel data (from your console). You just wouldn’t connect the OUT.

cisco 9300 series no problems what so ever igmp 2 I believe takes out the whole network! Crestron home, theater equipment, Kaleidescape, Sony TVs, crestron cresnet to ip gateways. ?Wireshark only

What switch are you using? does video pass to the other endpoints that do not have matching firmware? it's always been my experience with NVX to match all firmware (annoying but keeps everything

Traffic capture does not support that.

Maybe The Storm is DLNA related or DLNA Device enumeration related. As are most storms, similar to the HP jetdirect issues back in the day.

This started bout 3 weeks ago in my Crestron Nome system.? ?I have posted a packet capture on OneDrive at this link: https://1drv.ms/u/s!ArhoVwv4QUG4g7hY9Fbptbx0VgCtdA?e=pq8pVd All the traffic is

How about osc from the console

In looking at the demo program for the CG-DMX512, it *seems* that it is designed for Controlling DMX loads - i.e. Crestron processor is the master/controller. In our setup Crestron (more specifically

Have you looked at the CTI portal? There are a few videos showing SIMPL programming of NAX. Granted they aren't exactly a deep dive, but might point you the right way.

Hi Chris, Apologies if I’m repeating anything already said, but isn’t the CG-DMX-512-B what you want here? It has DMX in and connects via an ISC symbol. All the best, Oliver

Hi Dan, Kempton is right - the error you showed in the original post is saying the epiphan module NEEDS database 200+. Looks like you’re referencing old databases there. If you roll forward all

Hi Dan, I downloaded?Epiphan Pearl-2 v2 from Crestron application market and I am able to compile the sample program. I am using CresDB 207.00.01.00. I believe you only need to downgrade CresDB to

I have the 2 modules in my program.? Still don't see a how to on getting the streams.? F1 brings up very little info at all.

I was looking to use the test program on the client side.? Just as guide to answer questions I have.

Yeah the SACN device is for having a processor directly control a DMX network via Ethernet. I need to have the DMX Controller (Lighting Console) send commands and receive FB to my processor. basically

I did see that, my question though is according to the posts downgrading the database versions should work however it is not, is this because of the Studio program packaging the database/device

Most of this stuff can be relatively annoying to deal with. If you want to have a module patched to replace the metadata and reference from 3.5.0.0 to 4.0.8.0 there's a solution here: Newtonsoft

I know there was some posts on this and the answers were to downgrade the database... Just wondering if anyone can lend some support.? I've run into this on three modules i've downloaded from the