开云体育

I worked with TB to get v5.0 fixed. The issue is the StayAlive configuration in C#. I have yet to have any issues using Mathew Klucznyk's version and are simplified compared to Crestrons.

Hi, any news about Bose and 4 Series?

Fenix web server is really easy to use for static content. http://fenixwebserver.com/

+1 to using a combination of the Crestron Certified Driver (commands) and "Roku 3 Series" module (channel recall) from the Files section. Like others, I am using an oscillator on the direction

this is an update for all those who may run into this in the future.? I have finally figured out why this is happening.? Seems that there are two versions of the card, the ATC-AMFMSR and the

Interesting, all I get when I go to settings on the pair page and under the channels tab is a single line to name the TRACK.? Am I missing something?? Could you elaborate a bit more?? here is what

Yes it works. I did one a few weeks ago with the same card in it. Open the settings of CEN-TRACK on pair devices page to name the tuners something. In source routes page you should see the option

There's some videos in OLH: 2015 What's your level of experience with HTML/CSS/JS? You could try the CH5 xpanel, mentioned on another thread here, the github project link -

thought it may have been, posted here as well (in case people were searching for an answer)

Has anyone been successful in tying a CEN-TRACK-AMFMSRD to a Crestron Home system.? I can pair it but it only comes in as the CEN-TRACK.? Any suggestions?

Yeah I found that a long time ago with the Denon units, had to go into the module and adjust the timing and also poll the unit when turning it off - We saw that if the unit was Muted when turned off,

My Application is using a Pro3 with the TSRs. Since we Changed the APs from uBiquiti to Araknis (Though I agree that it is likely nothing to do with the Ubiquiti units) and set up dedicated SSIDs for

We can only wish that would be possible :o)

Yes I have seen the opposite were sub pages don't show up even though they are asserted.? In my case, it was caused by too much multicast traffic on the network overwhelming the TSR-310.? Enabling

I went through this last year, there's notes on crestron's website look up xpanel conversion tool

After a long back and forth with our network group We have finally got fusion to work on our network. During this process a while back I had econtrol working, but there was something different that

It's a TSR and 2 series issue. I had exactly the same issue on a project. I tried various firmware issues with no luck and ended up replacing with a 3 series.

Nope. And you can't downgrade a CP4 to a CP4R either.

Anyone out there having/had anything similar? Tough one as we don't do the network there, it is half the country away, and no remote access... Digitals are latching high on the TSR, even though

I have a new GUI theme with me. It has separate html code file for every page design. I would like create the theme using CH5 and upload to touchpane/xpanel. Do i need to install crestron contract