开云体育

Hi all, Looks like its been about a year since the TV Presets v2 has been discussed. How is it working for others? I know that there was some discussion about the sizing/formatting - has this been

It's more of a NEC code thing.? I believe the maximum power delivered by low voltage Class 2 wiring is 100VA -- that would be about 4A at 24VDC.? Considering most power supplies will actually

Hi all, *** I thought I start a little series about various tools to gauge the latest success/problems with some items... I have specifically not used the SRL because for years (long ago!...) it had

Hi All, I've seen this 'error' on a number of projects after program restarts and reboots, definitely with 3-series (can't confirm with 4-series), If I have 2+ programs running. *Error:

Theoretically yes, practically no. Do NOT connect power supplies in parallel unless the power supply is designed and specified for being connected in parallel! It has been a while, but I have seen

Also, additional power supplies up’s the amperage – which means bigger wire guage to devices and the components internal circuitry needs to be beefed up to handle the possible larger amperage

My latest article, "How SimpliSafe Compares to a Traditional Security System” is being published by the good folks at Residential Tech Today Magazine on their web site. SimpliSafe is one of the most

Yes you cant have objects in a SRL that can be swiped the same direction- one has to be vertical and the other must be horizontal or vice versa.

There's a potential issue if the power supplies are slightly different. If you have two power supplies, one at 23.5v and one at 24.5v, the higher could backfeed into the lower and damage it if it's

I am having difficulty understanding datatype conversion from SIMPL# to SIMPL+. Currently, I am trying to parse return data from SIMPL+ using my SIMPL# library. The return data comes into SIMPL# as a

Perhaps someone here smarter then me can explain why Crestron insists that a cresnet device can only be powered by a single power supply?? 2-24 vdc power supplies in parallel is still 24 vdc.? There

For anyone else not sure about the jumper, it's not something you unplug.? It's a wire that needs to be snipped or un-soldered.? I always knew of it's existence but never needed to deal with it

I must apologize in advance is someone has already answered this question.? I am trying to set up my first crestron home and I want to add in my Unifi Cameras.? I have added a manual camera but when

I loaded with toolbox and didn't notice the radio button about it being mobile vs xpanel.? Changed it to xpanel and now the url to the processor works:?https://172.16.64.21/ch5-test/index.html

you need to load it from the processor, push the ch5z file to the processor and use that link to open the web xpanel

After the first load it starts a 60 day count down timer for a free trail.? It is automatic and my timer started today.? From what I read it sounds like you can restore your processor and reset the

Does it still require a license on the processor?

I have downloaded the demo code and everything looks fairly straight forward.? I have loaded the program to the processor and can verify that port 49200 is open.? I set my processors IP in the

Correct.

Hi? i am having an issue with the dali driver of led strip, It shows failure when addressed on the dali commissioning tool but i can control the intensity of the light . But when i add it to a group