开云体育

I found the issue and it is confirmed with Crestron. You must initialize the panel first before sending the VTZ because the zip gets stuck in the panels bios from the first load the panel gets.

I no longer use the Crestron version but using Mathew Klucznyk version. He created these modules due to the issue of disconnecting from Core. We have been stable for the last 2 months, whereas using

I'm not needing a larger number but 0-65534 but any value outside of that range is entered I am not getting an error but a conversion that still saves that value. #DEFINE_CONSTANT maxLevels 65534

I did go round and round with Tech support but in the end they weren't much help BUT what I did discover was this: I created a test project and just loaded that with all defaults (left crestron as

There's an example on the help file for the FusionRoom class: https://help.crestron.com/SimplSharp/html/T_Crestron_SimplSharpPro_Fusion_FusionRoom.htm wrote:

WOW!? Thanks JohnMax!! All these years and I never knew about that Jumper!!? (Maybe I should RTFM!!? HaHa!)

Hi All, Just wasted a bit of time on this, so I thought I'd share for others'... Unlike the other major Apps like Netflix and Amazon Prime, The AMC app on the Apple TV will not return to the MAIN menu

Does anyone have or know of an example code, showing how to program a room into Fusion via C#?

Yea you will be good with that as long as you remove that jumper.

Yeah, this update is a complete mess. Not only is it not versioned properly, the .umc modules (at least those I have replaced in my code so far) have all had the [Error] digital output signal removed

Im Hoping someone has a Samsung video wall MDC module "LH55VMT" ?

Good day I Need to control a Samsung Video wall 3x2? "LH55VMT" I am hoping someone has a Module with commands such as "Power On/Off"? , as well as "video wall mode on/off" and Layouts for instance

I need enough power for 3 touch screens @ 27 watts each.? I believe the power supply in a Pro2 is 50 watts.? If I use a CNTBLOCK with the jumper removed, can I connect the Pro2 to net 1 and the

Has anyone installed a CSM-QMTDC-163-1-EX motor with a 24V Lithium rechargeable battery pack in lieu of the normal 24V hard-wired power supply?? I understand that Crestron is now taking orders for

Also make sure the clock is master clock is synced properly I remember having issues similar to what your experiencing when the core 110 was not synced correctly wrote: Have a great day, and please

Make sure you update all the modules. ?I barked at whomever would listen at the app market email for not versioning this properly. ?It's not just the CLZ. ?Then do a "recompile all" or Alt-F12.

If you need a value larger that 65535 in S+ you need to declare the variable as a Long_Integer. What you are seeing is the lower 16 bits of the value as the analog is automatically truncated. Be

I have a Simpl+ module that has an analog_input value representing volume level (0-65534) and storing that value and recalling that value on a reboot. This seems to work unless analog_input value is <

It's your program ID tag. So if your tag is AV for instance then: \\AV\\EventScheduling.dat

@ josephtimmerman You just opened a Telnet socket to the ZV endpoint and sent this string to control projector? Just want to know in case I run into this again. Even ZV support could not get this to