开云体育

i had to move to my laptop and use the SD slot trying to use the SD slot on my monitor via USB3 got me the i/o error every time

Not certain if I am asking this correctly. When writing a Simpl# program, are you suggesting, to keep all code within the ControlSystem.cs? I would think that having code broken out into several cs

I don't think you can do 3d arrays, so you can use a struct instead: STRUCTURE preset { STRING button[24][25]; }; preset presets[12]; Then you can address each individually or loop through them:

Create an array and loop through it?

I want to simplify a SIMPL+ program I have 12 Presets with 24 buttons in each one. The name of each button is a text that the user can change. I declare them as such: STRING button_memory_P1[24]25]

maybe howard and ray are ill. when i got one failed, aka Tony, i wrote a new 2gb sd card with an old image i had from my own mc3, aka Fafi, and it worked. this makes me thing that: Fafi image is good.

What I know about MC3’s & sd cards now I have 2 bad MC3’s – Howard & Ray Ray won’t do anything, Howard will boot, but can’t run a program Moved Ray’s card to Howard – same – no boot

Hey again, all. Same story as before - I'm retaking the programming classes as a refresher and as a pre-req for finally moving on to 301 and possible certification. I took Intermediate Crestron

So guys, what's the latest official information regarding Google Nest thermostats integration in a Crestron Custom/Home system? do we still don't know anything regarding ETA? Are there any unofficial

Hello, Yesterday we had a meeting with a potential client that wants to have lighting capable of changing it's white temperature (from warm white to cool white). Is this something that can be achieved

Ebay has one for $275.

Agree with Lincoln.? Don't think we will ever see a Crestron schematic out in the wild. I believe the AMS is of the series-2 generation.? ?Do they know if the first stage power is ok?? The ASTEC

Like most consumer electronics manufacturers, Crestron doesn’t release/publish schematics (especially not anything with component-level details like you’d need for repair) – the best you’ll

Thank you so much for the info.? I had actually already concluded that and have the project about half done.? Quick question though, in D3Pro, you can set the Fade Time for each circuit, is this

Thanks Steve, I appreciate the confirmation of Command Line and Flash interface. -Mark

Ah, that is probably the issue.? Had a PAC2 there fail, replaced with MC3 temporarily. What a dummy. Thank you.

I wanted to clarify, because that's not correct. The delineation in that article is regarding the deprecation / removal of the Flash "/setup" WebUI. Essentially saying if you've upgraded to v1.601+

A customer's Crestron AMS equipment had problems. A trusted electronics technician who specializes in the receiver has diagnosed a problem with the voltage regulator. However I need the electronic

Also check your Lock Rotation setting in the Go App setup

We have done quite a few of these projects. We always use the configuration portal to manually import everything from D3, it’s a bit time consuming but not horrible. We did a 200+ load lighting