开云体育

Assuming that you're talking Touch panels, what Slip said... Right-click on the device symbol header in the program view, and you'll see the extender options for each device...

Check the device extenders available for your touchpanels. Everything there that you need. -s

Is there a built in signal or logic or symbol in SIMPL OR SIMPL+ that can monitor no digital, analog or serial traffic for n seconds and give us a activity timeout. TIA RJ -- Rajiv Jain

Just read on linkedin that there?s a new CH driver for 2N to be released shortly. Von: [email protected] <[email protected]> Im Auftrag von David Chramcow Gesendet: Freitag, 19. November

Thanks Josh! Yeah, I have this with ATSG now...I'll update if/when I learn anything...

I have a problem in a dozen classrooms that crestron has been unable to resolve. wanted to reach out to the Group. DMPS3-4k-350C - DM3 OUT (Shielded Crestron Cat Cable with Crestron Connectors -

We use "unspecified" submodules, and haven't noticed any new problems. -- Josh Winn The LiquidPixel Group

Looking for the best (in terms of integration) solution for adding intercom capabilities to a Crestron Home system. Client wants to hear/see who's at the front door, provide access control through

I am trying to use Jetbrains Rider to build 4-Series Simpl# modules. Has anyone else had issues after building the solution and referencing the CLZ in SImpl+ that it does not import the API or compile

Anyone have experience with the?AMP-2210HT? If so, how is the sound quality with 8/4 ohm speakers?? I know it's probably mostly used with 70v... Looking to possibly use them for surround+atmos

We have previously used Mobotix. Very difficult to set up, but worked reliably. Started using 2N a while back, and it is much easier. Surprisingly their tech support was very knowledgeable on some

Bump...Anyone have any ideas??

Yeah, It not the same network only by Rs232

But not if the control system si not on the same network Envoyé de mon iPhone

Hi Raphael, Yeah , Rs232. But you can use SSH or Telnet with the same modele

Hi You van contr?l it By serial connection with the rs232 port Cdt Envoyé de mon iPhone

Hi guys, here a link to download the module i used recently and worked perfect for me, it is available into Crestron Application

https://support.crestron.com/app/answers/detail/a_id/4963/kw/ERR!%20NO%20HM%20SRC

Thanks a bunch. That did the trick!

I have heard there are some bugs, but the version 4.0 Poly module on the application market generally works for control. You have to update firmware past 3.5 for the "Remote" commands to work, those