开云体育

Recompile did not fix this problem although it has fixed other problem for me in the past

FYI I have found issues over the years that no one else has had or noticed, some I pointed out and have gotten fixed but I usually just find a way around it and don't say anything but this time was

I have had a few or symbols over the years where they or just don't work. The cases are not a lot over the years and almost all of them have been working for years or long period of time and something

PRO4>SETLogoffidletime 0 Logoff Idle Time CHANGED: infinite Thats what my PRO4 also responded with. My PRO3 didn't give any response when the same command was sent.

My past experience with programming slots is that each additional program does take some extra RAM overhead just to exist. If you use too many programs, it appears you end up with less RAM when

Thanks Steve. I just checked my CP4 and when I type in the console command the response is: Logoff Idle Time (minutes): infinite Jay

Has anyone else had issues with the LAN port on Samsung QM displays going to sleep?? I have two QM75R displays controlled over LAN as Crestron Connected Devices.? I had no trouble controlling them

Thanks

Do not wait for it! The Samsung MDC protocoll works fine. Tcp/IP client port: 1515d Samsung Flip ID: 01 (set in samsung menu) power on: \xAA\x11\x01\x01\x01\x14 power off: \xAA\x11\x01\x01\x00\x13 in

SIMPL team is actively working to resolve the 404 error since Microsoft removed .NET CF 3.5 msi from their servers. It can currently be downloaded from Crestron from this OLH article: *

I've never encountered a truly "faulty" logic symbol in 8+ years of providing support. When it isn't a programming mistake, the symptom is most often attributed to mismatched signal file version

Ideally, yes, the on-site technician knows to use those settings in Toolbox's program loading dialog ( https://help.crestron.com/toolbox/#System_Info/Functions/SIMPL_Program.htm ) if needed (I almost

Dave I thought the checkbox in Toolbox transfer window "Bypass auto stop/start of dependent programs" handles this automatically?

We have had more than half of these fail over the years.? I would avoid using this product, it will burn you later.

As others have stated, crestron logic symbols simply work. Check all driving logic! It's easy to get caught out if you are using the or to sum a bunch of pulsed signals and just one signal gets

+1 for Lindsay. Many many ORs all working as expected for me – from the CNMS(X) [though TBH it’s been a long time for those] through the 4-series (this morning) and never seen one not doing what

?However, I’ve seen some disconnects much faster than 20 minutes “ Yep, same here. Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von jbasen Gesendet: Donnerstag, 12.

Hi Jay, I make use of interface devices from Intensis which offer device specific modules and allow AC control over Wifi. For the larger projects with VRF systems, I opt for CoolMaster K

What is the fault? It is more likely the logic that is feeding the OR. Is one signal Hi when you expect to see a Hi from a different signal? The logic engine is the most robust piece of Crestron's

So tired of faulty "Or" symbols having to replace with buffers!!