开云体育

I just wanted to follow up that adding a little bit of extra header information to the http request solved the problem. Thanks again to everyone that responded with suggestions.

I ran into the same issue in the past, just add a new button to the old layout an give it a random join number, convert again, this time the joins should be also taken over to the converted project.

Follow-up... Well! It did convert the project, with small text, but the BIG THING is that it did not copy *ANY* Joins!!!? so it is, as Natalie pointed out, not actually compatible... Typical Digital

I just confirmed that the issue indeed is caused by the presence of a Crosspoint symbol, and this is probably why Dave H was not able to replicate the issue at first.

Well, it?s as always depending on the use-case and the environment. Most people try to get their dryer and washing machine out of way to avoid seeing and hearing them – this includes beepers

Hi,?did you find the solution?

On the other hand I'm a big fan of having my washer, dryer, and dishwasher send my wife and I notifications when they finish their cycles.? My washer and dryer also beep when done.? However, I might

I'm still at the point where I don't see the allure of most of these smart appliances. I see value in something like a refrigerator or freezer being able to tell me that the temperature has gone above

Getting washer and dryer status into the system is something I'm very interested in myself. We are moving from a house with a washer and dryer that for the past 21 years have been faithfully sending

Thanks Thyce

Thanks Kenny.? I'll take a look at Postman Jay

Hi Jay, I use Wireshark at work exclusively on remote machines. I RDP into a remote server or PC, install Wireshark, then before starting a capture I add a filter to keep the files size down. It

This would be a use for Postman. I use it for testing any http stuff.

Thanks Ken, I am sending multiple different commands to the hubitat that all work perfectly.? It is just the for suspending watering until a date that is causing issues.? So, I know that the token

Thanks Wyatt. The challenge here is that I'm almost 5000 miles away from where all the hardware is located so trying to use wireshark is a bit of an issue.? Also, all the commands the software is

I have no experience with the Hubitat or the Hydrawise, but ideally the response for an auth issue should be a 401 or 403 and not the 404 that you're seeing.? A 404 is supposed to indicate an issue

I have been messing with some HTTP stuff recently myself.? I've found the best thing is to run wireshark on the system with the browser and see what the traffic back and forth looks like.? In my

I am doing a residential and they are using Foxtel Now, the streaming service and have 2 of the dwt765fxt boxes. It looks like they are a repurposed google box. I would like to get better control of

I'm working with someone in England helping them to control their Hunter Hydrawise irrigation system that is connected to a Hubitat Elevation hub from a Crestron system.? Most of the commands being

Thanks everyone for the ideas. It looks like VMK-WIN will do what I need and be the simplest to implement, so I'll start with that.