开云体育

Yeah it wasn't until recently I noticed it has been slow prior was ok

The thought when I saw the OP wasn’t so much merging two points of control but perhaps the OP has a venue with Crestron house lighting (or other Crestron-ecosystem-type-things) that they want to be

We use the Shure P300 a lot for a single device interface and had good success with it. ?We'll probably use the QSYS Core I/O more now that its finally MTR Certified. If you try and use something not

Maybe I'm not understanding correctly, but it shouldn't be required. If you want a lighting controller AND Crestron to control lights, you can: A.) Feed the controller into the Crestron program and

That's good to know, and I agree, it doesn't make a lot of sense. I am already using adaptive bit rate, and EDID is set to 1080p/60, so a user's video connection is only in the 360-400Mbps range

Exactly what I was looking for. Thanks!.

Check here, then check back often: Microsoft Teams Rooms requirements - Microsoft Teams | | | | | | | | | | | Microsoft Teams Rooms requirements - Microsoft Teams Learn about the requirements for

I'm glad I could help, by accident!!...:) Yeah, I just happened to see the new device symbol one day - there's no discussion about it in the tech support camps... FTR, I have projects with both the Go

Port 22 is SSH. I am aware of (but have not personally implemented) ways to remap a Cisco device’s SSH daemon to listen on alternative ports but they all include blocking port 22 (typically the only

Forgot to mention that this is for a Teams Flex Integrator Kit, that's why I mentioned Microsoft in the OP.

Does Crestron (or Microsoft) have a list for recommended USB audio conferencing interfaces that work well with Crestrons Flex Integrator Kits? Thanks.

Hi All, I had to make a quick change to a TSW-1050 and TSW-750, after compiling the VT-Pro project and uploading it to the panels, they're now basically paperweights. They're so laggy that I can't use

Welp that was the problem still had the Crestron App symbol in there thanks for the reply, funny how I asked 2 true blue agents about this and this never came up.? Thanks

Same issue, also using a Mediaport 200. I believe I resolved the issue by dropping the bitrate to *300Mbps*. Very frustrating, and, frankly doesn't make any sense. I could use 2 of the 3 streams

Apparently it doesn't like switching modes and device IDs at the same time anymore. Sending them as two separate messages is working: {"Device":{"Usb":{"UsbPorts":[{"Mode":"Local"}]}}}

One of the possible ways to develop this method: 1. Creation of a precompiled or open source library (CODESYS library) for Xpanel standart protocol.?Third-party development can be difficult due to

In SMW, Are you using the GO device symbol or the older Crestron App device symbol??

Very Interesting! Thanks for the follow-up Steve!!

I tried using a USB hub during troubleshooting, but unfortunately it didn't fix anything.

Hello, Thought I would see if anyone has experience with these routers. Since the start of the DMPS line of presentation switchers I gave our network group two option for network configuration for our