开云体育

Hey John, My contact information hasn't changed in 20+ years. I've replied to at least two of your emails over the last couple of months, so please check your spam folders. If you tried calling me

Hey Tony ive been trying your email and various other forms of contact but cant seem to get you. Need some help with the HAI Unit Status module of yours. We are using your HAI rev9 module, and I need

I did a firmware update yesterday on a processor and experienced the same thing, shortly after adding a couple horizon keypads. Cp4-r IO’s are connected to simple motion sensors in closets. The io

I also have a very basic sensor hooked up to an IO port on a CP4 - driveway sensor, momentary dry contact, cp4 signal gets stuck high. Pull out the connector, signal still shows high, reboot proc and

I believe that module has been pulled from the Crestron site, cause the current firmware has broken the SSL communication.

Have you checked the processor’s error/message/program logs? That may help to point the finger in the direction of the culprit -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr.

That?s really interesting, Miles. I?m also using the exact same sensors on the verisport of my own CP3 and they also work flawlessly for over two years now. Did you open up a ticket with TB? I guess

Interestingly enough, I have pretty much exactly the same scenario. We’ve had a CP3 working for numerous years without a day’s problem. Upgraded the same program to a CP4 and get the same results

Hi All, I'm working on a project with (3) Trane XL1050 WiFi TStats, attempting to use the 'TraneClimateLIB v1.0 Comm IP' Crestron module. Has any one successfully done this (or alternative method)? I

Would you be willing to share the IR file? The old yahoo links no longer work. I have a travel job I am not able to learn the remote. TIA!

This is a known issue with the RTSP video window, but I think MJPEG should work. I can't remember if putting the controls on a subpage helps, but that's worth a try.

Is there a way to overlay controls over the embedded video on an iPad. It works perfectly on a touch screen. When the video is active on the iPad the video covers the controls. My Z order is correct

I meant to say Thank you.

On Wed, May 19, 2021 at 06:16 PM, JPCH wrote: > > You can have them behind the NVR or a separate switch, either is fine. If > you are behind the NVR then you can add each camera individually by going

Erm, to what post are you referring to?... Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von Miles Redbart Gesendet: Donnerstag, 10. Juni 2021 07:30 An: [email protected]

Yes, Congratulations! I finally got certified too at the beginning of the year and was able to attend Masters. I wish I had been able to set the time aside back in 2005 when I managed to get to do the

Getting to modern BIOS(UEFI) is a challenge even with directly attached keyboards. If your computer is Windows 10 based, holding the shift key while clicking on Restart button will give you the option

Congratulations. ?Tough job done.

Hi; I have a complaint that the scrolling lists (dynamic button list) scroll too fast, and they would really like if I could slow them down a little. ?I can't seem to find any settings to change the

Great, now I know who to call when I need a food ordering system for my MPC ;)