开云体育

Anyone else not get any group digest emails for the last week or so?

I could be way off, but is it possible the AP has a spanning tree setting causing this? Are you still able to connect to the QSYS devices is you add a hard-link? Just no discovery?

Update from ATSG: This is a known issue that will be addressed in the 4.9.x Microsoft Teams rooms build

Depends on your microphones. Currently we are seeing a lot of use with the Tesira X series. We add a EX-USB for the BYOD systems and use the onboard USB for the UC Engine

Hi all, just need a little help. Has anyone successfully setup an NVX/Dante network and also managed to get Dante Controller working reliably via a wireless AP? My system uses a Cisco SG350 and I have

We?re using a Miele dishwasher and washing machine at home. Up to now, they are notifying via app that they are finished which is useful. It has a REST API to interface with 3d party systems – I

Has anyone had any luck with this module recalling cable channel presets?? I have tried both using the parameters at the bottom and then pulsing the preset number and then using an sio (with \x0A as

Look through the Extreme X440-G2 series to see if there is a model with the port counts you need.? Very little to no configuration needed if you're just using a single switch with NVX.

It depends on how many of each you’re working with. I’d start looking at the Catalyst 9500 series and it’s real easy to do up to 48 copper ports and 8 fiber (using a C9500-NM-8X/C9300-NM-8M

Let me just add one other thing.? Using energy monitors to tell you when an appliance is done is not as simple as it would at first seem.? First of all, appliances all use some power 24x7.? On top

Hi John, My personal preference would be the QSC Core 110f or the new smaller Flex DSP, if this caters for the number of inputs required. Provides all the features and can easily be integrated with

Yanking the DSP is going to happen, guaranteed!? What would be your go to with the USB that the 1282 has and Crestron controllable?? Tesira?? The DSP is mainly for the mixing of microphones to the

A bit like Jay's comment. One thing I tend to notice is that in the end many clients actually just wanted to see if an appliance is: on/off, started/finished, has been running for x minutes. This

Just did a system with four switches and fiber ran to connect all of them, We used the Extreme 220 switches? with 10gig fiber ports and everything seems to be working great.? Only thing to note

I can throw some light on this.? However, the first question for your client is what are the use cases for each appliance.? The typical use case for a coffee maker is I want the coffee maker to be

I do not know if this has be asked before. I am doing a commercial project and I was looking to use a mix of Fiber and copper connections for NVX. Does any one have a recommendation for a single

Agreed with your pointe below, but the Roomba would be neat. I don’t know what the Roomba API allows, but imagine being able to dispatch your Roomba to a specific room from a touch panel. Sent:

It all depends on the appliance. Your typical appliance ( and the ones from your list ) are really only able to integrate with Crestron by controlling the power to them. You may be able to hack

What's the scope of integration that Crestron has with Home Appliances? we have a client that aside from the usual stuff (lighting, shades, climate, audio and video) he wants to integrate as much of

On a side note....yank that crestron dsp for a real one