开云体育

i have my co-ordinates for Ottawa in VTPro (always been there) i still have to use the panel to set Ottawa

Run an INITIALZE on the panel, set your default location in VTPro and load it again to the panel. This has been an issue for ages that settings of the weather widget are stored on a initial load

I have a temporary project with 42 Crestron App instances living in a PRO3 (and all of the iPads on the other end of VPN tunnels) – granted the PRO3 isn’t doing anything other than talking to

From where did you set the default?? VTPro-e or the app running on the panel I've had panels reboot and not retain the weather default in NVRAM. I typically set the default in VTPro-e.? Then, it is

Thanks Thorsten From: <[email protected]> on behalf of Thorsten K?hler <thorsten.koehler@...> Reply-To: <[email protected]> Date: Wednesday, February 24, 2021 at 8:50 AM To:

the nic, is your network interface card. seeing a high number on that is normal. Most devices are constantly talking across the network.your error logs would point to the issue more than cpuload.

I think that is 95.2%/97.5% idle.

At one point Crestron had a rule of thumb that? - I think - said max 10 instances? I am in the process of taking over a troubled job which is needing a reset every day apparently. The code has 30

If you do a right click on the project in the ProjectView in VTPro, an option “convert to Smart Graphics” appears in the context menu. If you chose that, you have to select a theme and then it?s

i have seen the problem on my tsw-770, tsw-752, xpanel i add Ottawa, CA - set it as the default within a couple days Rockleigh is back as the default - no program or VTPro changes i tried deleting

Convert?? Is there an easy way to do this or are you meaning rebuild it in SG? From: <[email protected]> on behalf of Thorsten K?hler <thorsten.koehler@...> Reply-To: <[email protected]>

Just take the analog into an Equate, then feed those digitalis into an SIO. Works well

\\images\\imageFileName.ext in a serial IO. I tend to place all my images on a ~resource~ subpage for easy management.

dB doesn't universally make sense to end-users. They'll see a lot of negative integers, a 0, and a small number of positive integers and be super confused. I'd recommend percent. You can set up text

Can you please share this module? Thanks.

Micah, F9 is for savages. CTRL + SHIFT + V is for bo$$es. You just need to format your conventions in such a way that you can't mess things up. Nathan, You could create a UMC that uses parameter

I'm trying to get dynamic icons and images working with the images just stored locally on the panels. Help files and online help say it's possible, but I haven't managed to make it work. It works fine

Hi all, Have any of you ever used a?SimplSharpOnvifInterface DLL (VS2008) to control a PTZ camera? I am trying to control the UNV (IPC6222ER-X30P-B)? - all the basic functionalities work without any

If the raw data isn’t available in dB, philosophically, I’m not sure I’d want to invent that data or completely trust its validity but an ASCALEL would do that for you. -- Lincoln King-Cliby,

Hi, Having a bit of a dumb moment but how can I turn an Analog Level (0-65535 or 0-1400) into a db so I can display that on a panel for the tech users? This is for the Shure MXA's and they do not have