开云体育

I have a TPMC-8X-GA and I am also seeing the Ethernet socket error. I just finished chatting with Crestron and the tech said it's a bug and they are working to fix it.

Thanks Oliver. I guess I have to start reading and follow the path that Crestron has laid out rather than the way I usually learn new things. P.S. - I didn't know you were a skier.? You gave it away

Thanks so much for pointing that out.? It is very weird, the link says the right thing but goes to the wrong place.? This link should work.

Thanks Troy I’ve started going down that road.

Use the module I linked to previously, then the UDP client in Simpl, enter the IP in the config, open it and enter the correct UDP port, connect the string. -- *Jeffrey Franck – CTS, DMC-E-4K,

i think the link is going to the previous article on shelly?

Hi Crestronfreak55, Good Day!!! Thank you very much for the modules you have created. By the way i am newbie in this field, i had CTI-P 101 long time back (2014) since then i haven't touch any

Hi, i?m currently updating the programming for a system that involves an older Kaleidescape V700/M300 combo. Programming is distributed among 3 Crestron control units (2 x CP3 and 1 x MC2E). One of

The reason I (and others) have said that Extension Devices are easier to implement than other CCD device types is kind of a "bad thing" if you're looking to be a CCD purist. It's largely because you

But isn’t there a pile of stuff going on in almost every driver? Of course the next one will go much,much faster. I’m just concerned about the learning cliff. Thanks wrote:

Well, to be fair there is a pile of stuff going on inside the Pentair module and there was a bit of "well if I knew I was going to need the data this way" moments. I feel pretty confident that the

Thanks Caleb. I’ll take a look at that section of the SDK. I’ve just always liked to start with something that illustrates the correct approach to a programming paradigm rather than trying to

We are just about to release version 2 of our Pentair IntelliCenter module which was a SIMPL+ module rewrite in SIMPL#. That task alone was a fun challenge and we were about to release that version

I can't answer your question, but I find it more than a little ironic that Crestron's door lock example would have so many features, when door locks in Crestron Home have only the bare minimum

I've had a request to port the Weatherflow Tempest weather station driver I wrote to Crestron Home.? How bad can it be.? So, I downloaded the driver SDK from crestron.com/developer and got it

That was how I originally programmed it but whenever the amp powered on we had an obnoxious noise and the client couldn’t stand it so leaving it in a ready powered on mode was the only way I could

Hi. What module do you use to make it work in UDP and how did you configure the camera? I can't do it. Thank you in advance. Manu.

for a work around either turn the output on and off at program start or turn the Sonance dsp on/off with 12v trigger or IP commands

I just tied my room off signal to input 2 on the Sonance DSP card which is empty. It simulates the room off condition. Did you report your situation to True Blue? They kept insisting what a mature

The Crestron Home part of the system isn't very large. The main program on the PRO3 is based off the Adapt model, and I know that you're familiar with their framework. Even the guys at Pantech hadn't