开云体育

Hello, For those out there who used a lot of xpanels web in their projects. How did you manage to give access to your system since adobe flash is no more working this 2021-01-12? I found some

I cannot speak to DB200 -- I am too chicken.? But I have had a few cases where programs have gotten corrupted in weird ways.?? You might try replacing your processor with a different type and then

I havent tried downgrading the DB since I actually upgraded to support a different module.? I have tried deleting the current module and just readding it, and get the same errors.? As I mentioned I

Nice job!!!

ckangis, ?Your reply got me thinking. I was finally able to connect to it using a static ip address and the PUF tool. Thanks for the help. It's deployed and working.

Hello, you have to create a RAW in the Dolby device manager. If you would like to contact me, I have developed a full module which will give you total control over the IMS including selecting the SPL,

I'm assuming that you have gained control of its IP address? (DHCP or Newly set static)... The unit has a Web server page, go to a browser and type the IP address (you may have eluded to this in your

Have you tried replacing the module with a fresh copy? From: <[email protected]> on behalf of <john@...> Reply-To: <[email protected]> Date: Tuesday, January 12, 2021 at 8:42 PM To:

Have you tried downgrading to a pre-200 database?

I think what you are looking for is a Serial Gather, Serial Substring (Expandable) and a Serial Buffer

Hi all, I'm glad I found you after Yahoo! I bought an Old Stock NIB, CEN-NSP-1. It came with the original release firmware and I've been unable to update its firmware. It displays the embedded web

I looked for this as well and never found anything. Not really sure how one of the largest HVAC solutions does not have a module in Crestron when so many other control platforms support Honeywell. I

I’m not sure you’ve supplied enough details for people to help you. The incoming string: is it literally “\x1\x2\x3\x4\x5” so 15 characters or is it 5 bytes (0x01, 0x02, 0x03, 0x04, 0x05) ?

thanks for the reply, does the module mentioned above work without going into S# to send a few commands?

I have the latest firmware uploaded on the CP3 and only this morning I've updated the software on my SIMPL Windows to see if that fixed it.

I have came across this in the past,? it has typically been a firmware update to the hardware that fixed it.? My guess is the software you are using to program needs to run on a later version of

example: serial Input : \x1\x2\x3 \x4\x5 i want output like this serial Output :12345 can any one help as.

So I'm currently working on the CP3

I am completely stumped on a compile error I am getting after updating to the latest version.? When I have run into similar problems in the past doing a full recompile after deleting the spiswork

You need to use S# to do HTTPS, SIMPL nor SIMPL+ support HTTPS. From: <[email protected]> on behalf of <itaibengal@...> Reply-To: <[email protected]> Date: Tuesday, January 12, 2021 at 5:31 PM