开云体育

Didn't see it mentioned, but using a DMM with a diode check mode will help with determining polarity as well as issues with the emitter.? If you have a blink style emitter you can use a battery or

Looking at the comparison.? The 351 list Multi Channel pass thru or 2 Channel and doesn't have Digital Audio over HDMI?? Does this mean that you have to setup one or the other and can't have both

Hi guys is there a way to get the Apple TV home button to work with IR module ? To open up the Apple TV app ? Please advice Thanks , Mingo

Try this: rtsp://user:[email protected]:554/cam/realmonitor?channel=1&subtype=2 Replace user and pass with the camera credentials (make sure that user has stream permissions). The last number, 2, is

Steve, Yes. I've seen the issue before. It's something to do with the curly braces being escape/special characters in C#. eg. Console.WriteLine("My Integer Is {0}, My Second Integer is {1}",

I tested a motor with a similar string (different node id) and it works fine from an RMC3,? double-check the node id. Otherwise, I am not sure why it is not working. Make sure in your com port there

Found it, but you're right, there is some risk involved. Since its mostly dead already I don't have much to lose however shopping for a replacement might be a better use of my time. :-)

No delimiter, by delimiter you mean in the COM port definition where TX/RX goes right? 4800, 8, 1, O is correct, RS485, None for handshaking. From: <[email protected]> on behalf of Michael

Looks correct to me, also you have no delimiter correct? 4800 8 1 O for settings correct?

Inside, hidden under a small board. But based on question, I think that would not be a good idea to open it without knowledge about what you’re doing. Enviado do meu iPhone

Haven't done that yet. I'm attempting it now. Thank you!

Tried that, thanks! No change.

Where does the SD card plug in? Somewhere inside? I don't see a place for one on the outside.

Hi Random Guy, are you using the old "DMP 64/128" or the new "DMP 64/128 Plus"? If I remember right there are a few modules in the files section, I did some work on this almost 3 years ago. When using

You try pressing HWR once then quickly SWR 3 or 5 times? It goes away for like 8-10mins and should come back after that

+1 to the SD card failing. You are describing the classic symptoms. I unfortunately have no experience with Prodigy so I’m not sure if there are any recovery options for replacing the card DIY like

Probably the famous SD Card issue.

Michael, The string the module seems to be sending when I press down is: \xFC\xF0\xFF\x80\x80\x80\xA3\x83\xF9\xFF\xFF\xFF\xFF\x0A\x86 Any time I send a command I receive back \x00 via RX From:

I need? live video of the Dahua camera.? On Mon, 4 Jan 2021 at 16:06, zac.sparrow@...<zac.sparrow@...> wrote: You want video or snapshots? From DVR or directly from camera?

Random Guy, Your best bet would be to get on the discord channel and ask for help there. My guess here would be something in the coding is causing this issue but without seeing the program and how the