开云体育

I have worked on a number of projects integrating with KNX using a CGEIB-IP, which seems to work pretty well. A few years back a Crestron employee suggested to me that we should always choose the

Ugh…. So close but just not quite ? -- several 12V options and a Lenovo 20V option that I could probably hack a new end onto and would probably work but nothing @ 24V Appreciate the offer but hate

Good luck. If you’re in need I stock a few in my basement for my system, I can give you a couple, but I’m a little further out from Vienna. Arrangements can be always be made so let me know. EJ

After doing some searching it looks like this might be a starting point http://opensource.lge.com/osList/list?m=Mc014&s= though I'm not seeing much for a refrigerator. I also checked and LG doesn't

Hmm… good call. I don’t usually think of Micro Center as a components house but they have gotten much better in recent years (at least the one near our Cleveland office – and I have been to that

Micro Center off Vienna Metro (Orange Line) might have what you need. Plus I think you can order online for pick up. EJ

I'm an idiot - I sent my wife a few boxes to get our apartment in DC up and running but apparently despite throwing a DM-TX-201 and RMC-100-C in the box with a plethora of each of them I apparently

How long are the runs? It’s not officially supported because in the old days people did stupid things which wound up underpowering devices and best case causing odd behavior/worst case damaged

It does not -- only “Please check the detailed specifications on the notice page on us.smartthinq.com” but that doesn’t really go anywhere. -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial

I agree with Steve. I would definitely prefer real Cresnet, but in your situation I wouldn't hesitate to use the CAT, esp. with Keypads. I did a retro project 12+ years ago where I had (10) TPS-6L

> > That's all i can say for now as the version i have is definitely not the > release version and yes NDA.

CAT5 has always work for me assuming your end device isn't too power hungry.? Okay for keypads but no good for touch panels or other high power devices that are powered via Cresnet.? However many

I’d use the module after you finish if you would share Lincoln !

Bruce, I meant to say I copied the dish image, but the older MMS2 wouldn’t boot

I have had mixed results with Cat5 or Cat6. Too much time trouble shooting. I have given up on Cat wire. I have started to use EX dimmers and keypads, using the Cat wire to 60v dc power to keypads.

I suggest to go to: https://www.crestron.com/Products/Control-Hardware-Software/Software/Control-System-Software/SW-SIMPL-PLUS and download guides for SIMPL+.? Here are the links:

I usually use "reboot" instead.? I am not even sure if "progreset" will cause the slave mode to take effect. At least on my MC3 and MC2E, I don't need to supply any parameters with "progreset".?? I

Hello, I'm a noob in S+ and trying to learn it . If its not too out of my league, I would like to create? a basic (keypad 0-9, +,-,*,/,=,clear) onscreen calculator using it. created vtpro project and

Lincoln Does the manual include a link to the API? I found the LG developer site (https://developer.lge.com/main/Intro.dev#) but that doesn't seem to have content related to controlling an appliances.

That’s where the documentation in the owner’s manual about the API gets a little vague. Biggest thing I think I’ll do is a vacation mode to cut energy consumption because (when the world is