Re: Autonomic MMS-5A and flash
You can¡¯t just copy the data . It has to be a disk image as their is security that ties the drive to the software Regards Bruce
By
pearce.bruce <bruceadsl@...>
·
#235804
·
|
Re: Autonomic MMS-5A and flash
I tried copying a MMS2 (pre A) drive over into a SSD drive and it wouldn¡¯t boot. Wonder if they don¡¯t support it, or I just didn¡¯t do it right.
By
j5races
·
#235803
·
|
Re: Cut Function Programing
Didn¡¯t realize it was on one of the current exams so I wont provide a specific answer but to add on to Brendon¡¯s answer ¡ it will be way simpler than you might think if you¡¯re using the right
By
Lincoln King-Cliby
·
#235802
·
|
Re: Cut Function Programing
This is a question that gets asked quite a bit, as it¡¯s a requirement for the 201 exam. All I can tell you is read the help files. F1 is your best friend.
By
Brendon P
·
#235801
·
|
Re: Autonomic MMS-5A and flash
Thanks Randy!
By
Tony Golden
·
#235800
·
|
Cut Function Programing
How to program ¡°Cut¡± function that forces the lights to the target level immediately if the button is pressed a second time.
By
rjrahuljain0106@...
·
#235799
·
|
Qsc core 110f and camera on C-160-T -Microsoft Teams
I have a QSC core, Ptz and usb bridge in a conference room and the customer is wanting to incorporate Native teams but still retain BYOD on the qsc. Can I use a QSC core and qsc ptz camera as the
By
Andrew Henkel
·
#235798
·
|
Re: DIN-AP3 D3 Program and C2N Keypads Amuck
Might the original integrator have been pushing the Cresnet power budget? ?Keypads act very oddly when they can¡¯t get enough juice. Disconnect half and see if the remaining ones suddenly start to
By
Oliver Hall
·
#235797
·
|
Re: Autonomic MMS-5A and flash
Sorry about the delayed response, I wasn't set up to get notifications for follow up posts. So the basic trick is to make a disc image of the MMS drive on another computer. I used Paragon Backup &
By
Randy S
·
#235796
·
|
Re: DIN-AP3 D3 Program and C2N Keypads Amuck
I've seen several cases lately where ReportCresnet can find all the devices and SimplDebugger reports all the logic is working, but the actually Cresnet endpoint doesn't do anything. Kind of like
By
Steve Kuehn
·
#235795
·
|
Re: NVX LLDP
Good to know!!? Cheers.
By
Bambam_101
·
#235794
·
|
Re: NVX LLDP
LLDP is coming on a firmware later this summer. Nate Lundquist
By
Nate
·
#235793
·
|
DIN-AP3 D3 Program and C2N Keypads Amuck
Takeover job, for whatever reason the keypads on this particular lighting system are only flashing their feedback off and on a few times and not triggering the programming attached to them.? Cresnet
By
XSDS
·
#235792
·
|
NVX LLDP
Hi All, Just wondering if NVX devices support LLDP reporting?? Had a quick look through simpl and could not see anything.? Have a job at the moment with a whole heap of removable roadcases with an
By
Bambam_101
·
#235791
·
|
Re: Best solution for Crestron App on IoS?devices ?
Seconded Jeremy's suggestion.? Most integrators I work with use gift cards and have client create account (I do commercial vs resi), but this way they can use whatever account they want.? And this
By
Jason Mussetter
·
#235790
·
|
Re: Best solution for Crestron App on IoS?devices ?
Several people here have recommended an iTunes $100 gift card as the easiest way to purchase the app -- that way you can put it on any account they want, and you reduce the risk of the account being
By
Jeremy Weatherford
·
#235789
·
|
Re: Crestron Visio stencils
This doesn't directly answer your request, but I want to take the opportunity to promote my buddy, Dave Tkachuk's VISIO engineering frame-work, Engeering Complete AV (ECAV). Dave is an industry
By
ckangis
·
#235788
·
|
Re: EISC - Communication
#crestron
I believe you have to manually clear the NONVOLATILE memory separately from toolbox.? If you did that it would probably fix what you are seeing. The way I've seen this done before (program I didn't
By
Jason Mussetter
·
#235787
·
|
Re: Crestron Visio stencils
I simply make my own and that way I can properly incorporate all of the detail and ports I choose.
By
sbob1123 <sbob1123@...>
·
#235786
·
|
Re: Dahua Cams Live view
#crestron
Hi! I tried with http://user:password@IP/cgi-bin/mjpg/video.cgi? ( http://user:password@IP/cgi-bin/mjpg/video.cgi ) in MJPEG and can get the streaming, but is so slow. It's refreshing every
By
mmonserratgarcia@...
·
#235785
·
|