开云体育

I built this several years ago when I couldn't find an example.? you will need to put the mac address in hex format i.e. 00:E0:6F:2B:AC:D1 would be like

I built this several years ago when I couldn't find an example.? you will need to put the mac address in hex format i.e. 00:E0:6F:2B:AC:D1 would be like

Thanks Dustin. I'll test that out.

Thanks @ Martin Philip and olivier_robert;? Yes, from the documentation it seems like it should work with the FF commands. However, my attempts thus far have been unsuccessful. The best I get is an

Thanks guys. I will try CEC.

Thanks @dblpnt; I will give this a shot.Can I simply install the older version 'on top' of the newer or is an uninstall of the newer one needed first?

I 2nd the vote for CEC in DM environments.? I have found FireTV CEC control solid after some earlier challenges? over the past few yearswith hangs with multiple commands being sent too often.

If I had to guess, those modules probably use the position value to generate feedback. That will always be 0.0-1.0 regardless of what the actual gain range is set to. I'm not aware of a way to get the

With the campus on the verge of starting to re-open after being closed for the pandemic, we were thinking of ways to keep people safe.? Touch panels in the classrooms will be a major issue. So, I

+1 olivier_robert for the status Also, a quick fix for NetFlix is: "Home" then "Right Arrow".? For Prime: "Home" then "Right Arrow" then "Right Arrow".? This works for my B8. Marty

Thanks a lot @nathan Can you please elaborate on having "variable lists and buttons"? My main concern is that there's very intricate logic driving the Room Selection subpages and whatnot, so we

Thanks @johnmax That's what first ocurred to me, having several instances of the Crestron App being driven by separate logic for each one.

There are a few different IR receivers that work with it, I use this one at

The processor can handle multiple, but best would be to create one UI that can handle multiple users. So create your vtp file with variable lists/buttons and have separate instances in simpl windows

I have a FireTV stick in the back of a DM 8x8. I control it using the Crestron "Generic CEC Source Control" module. It took a bit of trial and error to get the Address parameter correct. For me it

Have multiple IP IDs and instances of the Crestron App in your program, and have each user use their own IP ID. All will use the same UI loaded to the processor.

I have changed 1050s/750s into 1052s/752s by writing an image I was able to pull from a xx52 panel and using Win32 Disk Imager. Ive done like 5 or 6 and never had to do anything with a mac address.

Hi, is there a way to control the Chromecast with Crestron?

Hi, is there a way to control the FireTV stick with Crestron?

Good morning guys, I hope you are keeping safe! I'm currently working a project that has a very intricate GUI design (Crestron App) being driven by SIMPL Windows logic. But it just occurred to me