开云体育

Re: Using Intersystem Communication: Does this mean that if my SimplWin with the old equipment instantiated is running in Slot 1 and my Simpl#Pro is in Slot 2, I would use Intersystem Communications

My latest article, "Save Water, Save the Planet with the Chilipepper CP9000” is being published by the good folks at Residential Tech Today Magazine on their web site. This article looks at how a

Thanks Richard - the System Media Mute worked perfectly.

Would this be the time to try out the CH5 solution rather than going back in time? And the new processors run Linux so no limitation with vs2008. Just a thought, I'm just starting to learn programming

Hey everyone, I'm working on 2 exec conference rooms and am hoping for a wireless solution for room /Zoom control. I had spec'd the TST-902 as they had a Crestron wireless panel in there for 15 years

Not able to see it on the network and it is a replacement unit so it hasn't been connected to the gateway yet.

For those of you looking to find a framework that solves a large number of the initial hurdles I’d working in SIMPL#Pro, check out our open source repos at

I will try that. Thanks

Simpl# requires visual studio 2008. If you look hard enough you can still find vs2008 available for download. I believe that’s because 2008 is the last version that supports .NET compact framework

OK Problem solved.? The projector requires a null cable between it and the processor but the AVR does not.I don't know if the additional un-needed connections would interfere because my adapter is

Does simpl# still require some? microsoft framework underneath, that is practically not available anymore ? K.

Hi, I'm having some issues controlling some christie Access series screens over IP. I've been trying the roomview connected display module but get no response from the screens and no feedback, even

OK, cold start of the Yamaha fixed the problem…. Von: [email protected] <[email protected]> Im Auftrag von Thorsten K?hler Gesendet: Montag, 25. Mai 2020 22:52 An: [email protected] Betreff: Re:

Thank you for the suggestions, then I think it's not possible to change room names dynamically and go with the methods you guys suggested.

QB Series is Crestron Connected.? Try that and see if that will work for you.

Justin, Yes you can absolutely use Simpl# to do this. Just use a 3-series intersystems communication to control Simpl Windows if Simpl# doesn't have the equipment you want to control.

Not sure what you are having problems.? What are you using to program the system:? D3PRO, SIMPL, or Crestron Home/Pyng/OS3? Overall I have been pleased with the DIN-CENCN-2 however some of the

Legend.? Thanks for that.? I had seen that and tried but couldnt get it to work but I was just formatting my commands incorrectly. I stupidly assumed that you would be able to set ids like you

Hi, Looking for guidance, thoughts... I'm thinking of rewriting the code for my Home Crestron System and in the process learn to use Simpl#Pro and OOP (I'm a C programmer but I've only dabbled in

In console Help all REPORTCRESNEt 1 or 2 this reports devices attached EX DIN-CENCN-2-POE>REPORTCRESNEt 1 1.11: C2N-IRGWF Wall mount IR gateway:Flush [v1.00.16,#013A23E6] Jul 7 2016 1.12: C2N-IRGWF