开云体育

That doesn't mean there is one available for us to use.? I'm pretty sure their app controls the box via the cloud, too.? I really don't understand why everyone seems to think IP control is the best

Never seen any for these, but whats wrong with good ol IR? Never have any issues with that, and you can get the IR receiver for the rear so your emitter on the front isn't an issue.

Did a quick search for the protocol for this and haven't seen anything other then a app for a ipad that can control it.? If a ipad can do it, there must be protocol for it.? anyone have it or a link

Yevhen, Thank you for that Graceful solution. Sometimes I over think things!

I've used projector central a hundred times and didn't realize it had that functionality. I would have dismissed it if you hadn't linked to it, so thanks for that Jim. Have used it often for throw

Try next way: event -> Crestron send e-mail -> CRM receive e-mail and make Lead or task

hit F1 on the RMV, there is an example at the bottom of the page.

if you have to keep the director, you could just use it for system management and troubleshooting, but not use it for switching -handle switching within the processors that need it.

Whatever you do, pay special attention to what the projectors is supported with. At that ratio, very small movements will cause noticeable shake in the image. Door closings, footfalls above, HVAC

Back in 2003, I also had the same need as this, so I wrote some custom windows software that I used all the time for this kind of thing (as well as string testing).? Was very handy as an internal

I haven't used the C7520QT, but we just installed a 7017T in a classroom. Aside from having to use hex strings and calculate checksums, integrating it wasn't so bad. The hex strings for the 7520 are

Hi All, Has anyone controlled a?Dell C7520QT over rs232 before? I had some experience with one yesterday. After much time spent on it...I realised only the power command can be sent to the device

With the app running in the background, swipe down from the top of the screen to reveal the notification menu items.? From there you can tap for more settings.

I created a SIMPL COM Port program for this reason. Loaded it up to a spare slot in my Test MC3 and use it to change Com port baud rates etc on the fly whilst capturing RS232 codes. From memory select

Hi All, Has anyone ever tried to communicate and control ATEN VE8900 to any crestron processors? I'm using TCP-IP Client and port 23 via telnet and port 9138 via TCP. Any ideas/or suggestions will be

Just curious if anyone has created a module to communicate with their CRM for automatic case creation on specific errors or system reboots. I am using VTiger and would love to be able to have service

I have one system with 40 TSW-730s, 2 DGE-2s, 3 DM-DGE-100s, and 3 DM-DGE-200-Cs, and a couple (classic) XPanels on one processor and a couple other projects with probably a similar number of total

I haven't had the issues, until just recently, and only with one system, but it's pretty bad when it happens.

After talking with another co-worker, I'm changing my stance on the director.? If you leave the director out, then you should be able to manage the streams independently of it in each processor, and

The CD-500 protocol is very similar to the CD-400, and includes jog and shuttle as commands 15 & 16 respectively.? Both of these can be forward or reverse. The CD-400 protocol I found is for v.1.03,