开云体育

Hi All, Has anyone ever tried to communicate and control ATEN VE8900 to any crestron processors? I'm using TCP-IP Client and port 23 via telnet and port 9138 via TCP. Any ideas/or suggestions will be

Just curious if anyone has created a module to communicate with their CRM for automatic case creation on specific errors or system reboots. I am using VTiger and would love to be able to have service

I have one system with 40 TSW-730s, 2 DGE-2s, 3 DM-DGE-100s, and 3 DM-DGE-200-Cs, and a couple (classic) XPanels on one processor and a couple other projects with probably a similar number of total

I haven't had the issues, until just recently, and only with one system, but it's pretty bad when it happens.

After talking with another co-worker, I'm changing my stance on the director.? If you leave the director out, then you should be able to manage the streams independently of it in each processor, and

The CD-500 protocol is very similar to the CD-400, and includes jog and shuttle as commands 15 & 16 respectively.? Both of these can be forward or reverse. The CD-400 protocol I found is for v.1.03,

I've not had problems with this before, but if port forwarding is done, it def needs to have the crestron DDNS, but I agree I have heard these security concerns as of late...

The director will speed up programming, and make things easier, as long as you aren't trying to do anything crazy.? If the design demands a single processor, then I would pass on it, personally.

Yeah, not a bad idea Steve. This system will also incorporate an NVX Director-160. Any thoughts about that? BTW, this is something that is out for bid, not something we are designing, so my hands may

Port forwarding is not recommended, especially with the recent attacks on the CIP port.? I think the best course of action would be to find out why the Wi-Fi is so bad and get it fixed.

IMO, it would make more sense to split the classrooms into groups of 25 - 50 per processor, put the NVX program on it's own processor, and then connect them all via EIC.? That way, if something

While I was waiting to see what experiences members of this group might have had, I contacted TB support. They recommended 150 as the practical limit. They stated the real limiting factor was the

You should get an Ipad (samsung tablets work well too) with LTE enabled, or they probably have one if they can afford a Crestron system. Then port forward all the needed ports and set it up with

This would depend on more factors than just how many IP-IDs are available.? What are you trying to do that would require 200+ panels to be tied to a single processor?

Thanks Andrew, I tried this yesterday, but the 3 dots did not show up. I searched TB, but did not find anything. www did not help either... Everything is fine on a Huawei and a Motorola, it is

The only reason we used a TST-902 is because of WiFi issues at the client's location :)

Guys, What is the most number of TSW series touch panels you have ever installed on a single three-series processor and how well did it work (no streaming video, just basic buttons and such)? Does

To be quite honest, the TST-902 is junk. You should have installed an Ipad, this would solve your problem. In addition, you cannot have it switch between gateways as far as I know...1-1 but please

No one has done this before?

Hi, have a look at the Hitachi CP-WX8650. It?s a pretty cheap projector with an exchangeable lens (but it?s WXGA though). You should get it around 3.5K without a lens.? An long / ultra long throw