开云体育

Is there a command to set or change the multicast address of a DM-NVX-350 and set it in Transmitter mode using Script Manager of Toolbox?

Hi, last time i checked, there were also devices with a LAN port available (wired RAP). But the Arubas were only an example. Sometimes they are called "VPN boxes" or "VPN gateways" - basically a box

?It is much more complex than that.

?Believe it or not this is exactly how the V12 from my previous post bit the dust. It got dimmer and dimmer until it went dark. It would cycle through this process at various degrees of intensity

I haven't seen anything like this. Typically if the DGE fails, it fails hard. My guess would be the screen (could have ambient light sensor enabled, etc). Try a different source on the same input of

I am wondering if I could connect an IR receiver into the IR IN port. Would this then pass the received IR signals directly to the IR outputs, essentially working as an IR extender for anything in the

Martin, I would also like more info on your product, if it's ready to deploy or still in development.? It makes sense that your described solution is not "off the shelf" as I wasn't aware of boxes

thank you

This isn't something I've seen myself but rather something a (highly technically inclined) end-user client is relating from a not-so-technically inclined but VIP end user of theirs. The user spends a

Hi Martin, I would like to get information about your product. I will also be attending ISE. What we do is use an IoT mini PC with an USB HDMI capture device and have control software to allows

The product you linked to is a Wireless Access Point that establishes a VPN back to a central wireless controller, intended for branch offices or telecommuters connecting to an enterprise network.

Hey guys, I have a remote customer with an older system using several TPMC V12 in wall panels. ?One of them bit the dust. ?Path of least resistance here is to swap it out. ?I have a newish TPMC V12

Thorsten, giving a quick look, it might probably be quite the same thing tbh. I didn't know that "remote access points" were out in the market, didn't know that solution existed. Besides that, here in

These kind of devices are usually called "remote access points" and are available for quite some time now. What distinguishes your solution from solutions like e.g. this one?

I’ve always found rakocontrols.com to have cost effective solutions for both wired and wireless lighting control. There is also a prewritten module for them. Regards, Gary.

@mike Slattery for video streaming you mean a couple of webcams so the programmer can see what's going on on the place? or what video do you stream? To the rest, actually i've developed that solution

I've been following this as well.? I do a lot of followup and punch item remote work with all the integrators I work with, and I usually use TeamViewer (or the like) to connect to tech's computers

I use Box sync within windows on parallels on two Mac computers without issue.

Martin, I've been wanting to put a Mikrotik on my corporate clients' network. If you do this, do you need IT to forward a port? Or do you have specific configuration on the Mikrotik that initiates a

Since we went to a Mini IoT Pc with dual NIC and Video streaming, our large Distance Learning rooms went to only about 2-4 hours of setup time without the programmer leaving the office. This is due to