开云体育

Jeroen, Image as in graphical? there are several stock photos on Crestron website under the product webpage. Charles, ________________________________ Sent: Thursday, January 17, 2019 8:35 AM To:

Revisiting this post. You guys are saying have 400 subpages on a single page, each with one button?

Hi, Im looking for an MC3 Image file. I found bunch of Reddit and Yahoo topics but no links in it. Does anyone has the image? Br, Jeroen EDIT: Link: (

Anybody else using this device and able to get 2 way control? Thanks!

Anyone have experience with the Legrand MR232?? Connect with Termie and control it no problem, go through a CP3N and get nothing back except the last 2 or 3 digits of whatever command I send it. Put

Thanks Jay, I will try this at home! I`m looing for an integration with "Domoticz" which runs on a Raspberry Pi-B. It does accept HTTP commands but JSON looks more prommesing. Jeroen

I have this working using an IRUSB transceiver from Video Storm -http://www.video-storm.com/proddetail.asp?prod=irusb on an nVidia Shield Android TV box. It should work for other Android TV boxes as

view port or toolbox? Sounds like the power supply, I would call Crestron Tech Support

1 command = 1 level change. If the device supported a press and hold function, it would normally have separate button "pressed" and button "released" commands. Without separate commands, the device

Should be . . . depends on the brand, I suppose. From: <Crestron@...> on behalf of "Stefan Andersson stefan@... [Crestron]" <Crestron@...> Reply-To:

Has anyone controlled a Newline TRUTOUCH X5? More specifically, the volume control. The RS232 commands are in the manual, so easy enough there. I'm just wondering if a press and hold will raise/lower

Hi, Is it possible to control Android TV via IP or is it only IR/CEC for sat boxes? //S

"The Stop command is sent 1 second after the preset save or recall" Perfect - thanks again so much! - Chip ---In Crestron@..., <adamsx2@...> wrote : You have to send the "Stop" command

Can anyone who has updated from V1.0 to V2.0 tell me if the pairing needs doing again after updating the module from the Crestron side, or whether just updating the program to the new module and

Using a serial I/O and a TCP/IP Client tied to the IP of the roku device. For Keypresses: POST\x20/keypress/Home The following are the key names that are recognized by ECP: Home Rev Fwd Play Select

Recently tried updating Pac 2 so we could add some newer crestron app, the upgrade failed and it just keeps restarting, tried using alt-K from within viewport to no avail. everything is unplugged and

You have to send the "Stop" command before you send another command, such as a preset save or recall in order for it to save the preset properly if you are using multiple presets. It simply tells the

In Simpl+ review makestring.

i'll check the sleep settings again to be sure mark

"I need help to write a module" The EASY way to do that would be in S+. Is that what you'd be interested in, or did you need/want to have it done in SIMPL? - Chip