开云体育

These guys have an email module with TLS, so maybe they'd be able to help get you pointed in the right direction? I haven't had to do TLS myself, fortunately.

Pretty sure the error message says to leave the DST blank, because you set it on the processor. Crestron@...> wrote:

use clock3 symbol clock with no dst parameters Sent from my Samsung Galaxy smartphone.

Leave it at 0d. It will pull dst from the processors clock settings Ryan Gray 480-277-7012

What should I set the dst for the clock driver ? It’s a 3 series processor and it’s giving me an error when I set it to 1d Thanks , Mingo

Easiest method Clock Driver -> PAST(03:00:00:00s in parameter) -> One Shot-> Button presser-> Projector Power OFF I tend to use the Alarm Clock Module so the time is user editable.

WHEN would do the job

Guys I’m looking to see what symbol I should use for this ? The client wants me to set up a command to send an off command to a projector everyday at 3am Please help Thx

That's correct..

The other thought I had would be ARAM values weren’t moved over to the new CP3, so if they were using something that’s not set now it could cause an issue. Easy enough to get it and write it to

"If you took the code from the old CP3 and loaded it to the new one then in theory it should work the same." Unless there was something like a "config.txt" type file that had settings in it that were

Also, it could be a firmware revision issue, especially if the old CP3 hasn't been touched in a while. Crestron@...> wrote:

Yup its now in the device discovery tool. There’s a radio button at the bottom to select between local and remote. When you choose remote the connection buttons show up at the bottom of the window

By backup, you mean there was a copy of compiled code on the old CP3? I can only assume, because how else could you know they are using crosspoints. It is possible that the program was talking to a

If you took the code from the old CP3 and loaded it to the new one then in theory it should work the same. A couple of things you can check: * Firmware - see if you can load the same firmware version

Hey All, I got a costumer who lost his source Code files, some guys programmed the system years ago and now they are lost. Now the CP3 got Hardware issues and i had to replace it iwth a new one. So if

They've had this in Console (using the device to report device discovery), is this inside the device discovery tool?

Hey all, looking through the release notes on the software updates released today... They added a pretty sweet feature to device discovery where you can discover device remotely through a control

I use Hue in my personal setup. There's a Simpl# module out there, but I have a 2-series so that wasn't an option. I just use a TCP Client to access the hue's native API to set scenes as necessary,

Right, never suggested it should be anything like a complete lighting system. Merely curious if anybody is seeing end users put this stuff into homes where they may already have a Crestron control