开云体育

Hey All! With version v1.x and v2.x, pulsing the initialize was never an approved method. The v1.x examples programs always had then initialize tied to the Is_Communicating signal. v2.x examples had a

jjustinhill, I just checked out that site, and it DOES mention you can get "earlier versions of VS". It doesn't say 2008 specifically, it mentions 2015, and 2013, but implies that possibly all earlier

Just a quick note to let people know that I've added a new post to my blog, Topics in Home Automation. The post is titled "A New Model for Residential Automation – Part 1". My blog can be viewed

I believe that this is because, the Jump button on the Hopper is Soft Settable in settings, for the remotes that are pared to it. It's knows we are there but doesn't know what we want to do with our

anyone actually made this work? need it to work with audio-only (sip) and video video works fine, but sip incoming or outgoing are a problem outgoing is a Crestron issue (can't use 'dial manual'

Phil, that's what I'm thinking as well.

This would be able to be easily reproduced using a one-shot and a buffer. "Reinit" goes to one-shot. compliment out of the one-shot enables the buffer between communicating and initialize.

I make live adjustments to Biamp via Canvas or through the Tesira software and it immediately reflects on the Crestron TP status indicators being mute or volume levels or dialing or whatever I'm

Makes sense. The scenario I'm considering is one where I've got a technician making updates to a live Tesira unit (for instance, adjusting min/max levels), and want to be able to prompt the module to

On my system Its under Crestron Modules (CresDb 66.06.003.00) Time/Date TIMEDATE(cm). If you can't find it that way search using the Edit Find Symbol in library function on the top menu. But it

The module is for X-Generation and 2-series machines. Create new SIMPL project for a 2-series unit, import the module, check control system compatibility and save the module. That should work in most

If it is an iPhone (any model) then select iPhone 5 as the device. The app does not, and will not ever, support retina displays. If you do a custom resolution then you are doing little more than

I don't know about the iPhone, but in my experience the Crestron App scales the iPad interface down if you try to use a custom high resolution on newer iPads with retina screens, so your high res

I see that apps are taking advantage of the full screen, not sure if the crestron app is or can do that. The notch does intrude into that resolution when apps do take advantage of the full resolution.

Thank you so much for the insight. That’s helpful to hear and I’ll pass on the info if they’re willing to hold on. Guess they don’t have much of a choice as they’re already heavily invested

Still having the same problem, 2 years since someone posted about this. We have installed (so far) 12 DGE-100 units in classrooms and, at various times, several of them get stuck in a mode where they

Does anyone know what happened to or have a replacement module for the missing TIMEDATE (cm) Crestron Module when programming for a 3 series processor. It normally shows up in the Time/Date folder in

Doesn't a DSP re-config drop the IP connection? It will also drop the registrations, which is why modules keep trying to register the first control; if registration succeeds, that means it needs to

From Biamp support website regarding 2.x module deep dive: It is important that there is a signal connecting 'Is_Communicating' feedback to 'Initialize' control input. The alternative is to place a

Hey Jeff, If maintaining the init signal rather than pulsing it, how do you recommend making sure that if the DSP config changes, the module reinitializes without having to restart the Crestron