开云体育

Hey Guys, I am trying to extract some info from a HikVision Camera ( Model, Firmware Version and MAC Address). I received the API from HikVision and I have my strings formatted so if I enter on a web

Thanks Neil, that is exactly what I needed!

Recently I've been investigating ONVIF to control an IP PTZ camera. Looked through all the ONVIF protocol documentation and did some snooping with Wireshark. I found this old thread in here, but I see

Great, not the responses I was hoping for, Hitachi says Crestron has a unit they are testing so I guess I'll wait and see what they say. Thanks! Crestron@...> wrote: -- Chuck Perkins, CTS,

They were primarily just interested in the Outlook integration and the one touch join function. I’m pulling and displaying the attendees from the meeting info, but as far as the “live” SfB items

And the comms lock up after a while. Gives horrible a bad name.

AFAIK it is RS232 only. The codes are LG. Don't even think about ramping volume. responses are slow as a wet week. Phil.

"client wanted a similar feel to the polycom panel without actually using the polycom panel." so even with the touch-to-join you've gone to the effort to make, do they have the ability to see the list

not to my knowledge, i looked into and from what i could find it would have to be done in simpl# as it requires secure sign in via the https site but its something ive been waiting for One option is

"Yep, exactly. You don't need the while (1), and you can call it from main." Awesome - thanks. - Chip

"When compiled I get a bunch of errors including: Undefined variable GATHERASYNC Incorrect type GATHEREVENTARGS" Assuming you got this already, but 3 Series only. :) - Chip

Yep, exactly. You don't need the while (1), and you can call it from main. Crestron@...> wrote:

"I have tried the EventHandler with/without the RearmGatherAsync(eArgs.Input)." Hey Andrew? If the EventHandler calls RearmGatherAsync, which essentially makes this a recursive loop when new data

What’s crazy is that I checked some TSW1052 they have on this job and there is 3 entries with same IPID .. not sure how they did it Thanks , Mingo

The command should be addm (IpId) (processor ip). I don't believe that all 3 entries can have the same IPID. Have you tried using System Info in Toolbox? Crestron@...> wrote:

I’m still having some issue with this I’m trying to add more than one IPId so the touch panel can talk to 3 different processors Thanks , Mingo

If you want to simulate the join meeting experience, it actually takes quite a bit of work. The easiest way would be to cursor over to the meeting and click join via arrows, but if you want the join

Ok, this seems to be where I'm stuck. Everything seems to be working fine except that the state of the power amp won't save when I turn the DMPS off (front panel). I turned the power amp on in

Ok I will give it a try Thanks , Mingo

On a touchpanel, I believe it's addm, not addp, but I could be wrong. Crestron@...> wrote: