开云体育

Then they need to make the SD cards field replaceable period. It's a complete joke that the entire processor has to be sent back to replace a $10 SD card. I've had a few MC3s sent back because of

Hey folks, Any of you integrated Crestron with British Gas Hive products? I have a client who wants to control multiple Hive Active Plugs. They appear to use a RESTful API

The largest I can attest to is 5x Fusion Room full modules ( each with Scheduling Awareness, 4x Static Assets etc) per Slot. Born out of necessity, it's a pretty wild build with 40 ( SLOTS 2-9 x 5

There isn't really anything Crestron can do about this that they haven't already done. Flash memory of any kind has a limited lifespan because of the technology. If the program is throwing lots of

I haven't seen it happen yet on a CP3, but if it does it's going to be sweet when the 75 room identical room job I just worked on has all the processors fail at the exact time since they're running

So after several processors having internal memory card failures, I have very little confidence in the reliability of 3 series processors. What is everyone else's experience with this? It seems that

Thank you so much Brian. This makes sense. 3 Fusion Rooms and 3 SSI modules tied into its respective Room Symbol and make sure to ID them different. This is just the clarification I needed.

Hope your Fusion class wasn't as much of a waste of time as mine... I took the class about a month before they began using the SSI modules, and even knowing that was coming down the line, they only

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /Modules/TASCAM BD V1.0_archive.zip Uploaded by :

Thanks in advance to anyone who can help me. I just finished the Fusion class last week but the answer to this question was only partially answered and now I regret not asking enough questions during

I have latest TB on a different VM to my normal production VM. Always the same issue.

same ver of toolbox?

To update this. I still can't connect to these by USB on my MBP /Parallels combo. However my boss using MBP boot camp win10 had no problems connecting.

No they can be outside the range and you can change them no problem. ReportCresnet is your friend. -s

Does anyone know if I need to change Cresnet IDs to within the range accepted by the DIN-CENCN-2 before I connect them to the unit, or can I still access and change them after they are connected? I'm

I have seen this happen on a few remotes. Haven't figured out if it's a bad battery connection or something else.

It's just Ethernet over HDBT, so you need an IP module for the projector or a Crestron Connected Display module from Crestron database. Crestron connected features, if built in, may need to be enabled

I haven't done this, but from what I have seen when you configure your output cards for the receiver you choose HDBaseT Receiver and then just add your serial driver for that device. Im not 100% as I

i see the start/stop commands I don't see the Y & Z values being sent as part of the string just ramp to X value I see the Y & Z values are passed in, but don't seem to be added to the string maybe

Got new project. Components are: DM-MD16x16 and NEC NP-PA53UJL Projectors and a CP3 processor. The content and control are over HDBT for all projectors, and I haven’t done controlling devices over