开云体育

I've worked with three of them in the past. Never had an issue with USB. I seem to remember that it was DHCP out of the box. Have you pulled all the devices off the unit and tried to connect?

I don't remember any issues connecting to it with USB.

Got a Pro3 that is going to be exposed to the internet so I'm setting up SSL and AD authentication on it. Got it connected to the domain and authentication is working normally. However when I connect

Hello I have struggle with clients complaining about MLX-3. I am not sure if you guys face the same issues. I have done many different types of GUI, trying to make user friendly but still getting

Looks like I have the following for ID 01: kf\x20\x30\x31 0\r for Zero no Volume (0) and kf\x20\x30\x31 66\r for Full Volume (66)

I don't have one of these in front of me, but isn't the command for direct volume control "k f <ID> <VOL>"? I think you have to the TV ID to a number and use that number to get feedback. If I remember

We've found that the site has a very high RF noise floor across all channels. I've shut down wifi and other known RF devices and still end up w/ a steady blast in the 40-50db range. The security

Forwarding ports 23 and 80 on the router to Lutron...that sounds like a very bad idea. Use a VPN, or the connect Bridge as Joe indicated. Caleb Radecky | Manager, Online Products & Services Crestron

You need to forward both ports 23 and 80 if not using Lutron's connect bridge If you have a Lutron connect bridge, no port forwards are needed

So first off some comments: * Can't connect to it using USB even though the thing has a USB port on the front * Can't find it using Toolbox device discovery on Ethernet (PC & gateway plugged into same

So I'm integrating Crestron with Lutron shades and lighting using IP. All seems we'll but wanted to know if the Lutron processor can be connected remotely. I have forwarded ports on the router so I

Hi Ilya,Did you manage to get the feedback from the LG sorted? Tim

If the LEDs are dimmable, the 2DIM8 is fine. I have a house with over 250 LED loads and using 2DIM8 just fine. I set them up as Incandescent.

Thanks Thanks , Mingo

The CLX-2DIM8 will dim LED's but the driver has to support forward phase dimming. We use CLX-1DIM8's and TCP fixtures in our office, and they play fine. The CLX-2DIMU8 will play with more LEDs as it

3001

I done (successfully) numerous decentralized Crestron lighting control systems but never a centralized. I've been brought in to assess an older installed system from another manufacturer that is

Does anyone know what's the port to use TCP/IP client for the vantage infusion ?

Just a quick note to let people know that I've added a new blog entry to my blog, Topics in Home Automation. The blog entry is titled: Update on Aging in Play with Residential Automation Here is a

I haven’t looked at the pinouts lately, but the Camera DB9 on the MXP codecs could also provide power to a Tandberg camera. Wondering if someone connected oddly wired serial cable to the camera