开云体育

I haven’t looked at the pinouts lately, but the Camera DB9 on the MXP codecs could also provide power to a Tandberg camera. Wondering if someone connected oddly wired serial cable to the camera

Not a joke. The magic, factory smoke leaked out of both procs. Per the True Blue support case "Ports fried. Physically saw when it happened; opened CP3N & saw ports smoked"

So, when you say "didn?t bother with others? does that mean you did not test them or that they are not actually making any connection? Using a Crestron 9-pin COM port you must ensure the pins you

Yes, it says file corrupted for me even after re-downloading it.

"The cable I am using is a crossover." It's the same cable as when you test with your PC? "I tried to use serial gather to hold on strings in case it just pass through." If your intent is to hold on

Is the device supposed to reply when you send a command or do you have to query it for its status? If you short pins two and three together at the switch and send a command do you see it come back on

Thanks, It transmitted the command. The switcher at the other end received the command and worked as I told it to do. But I need to know the status of the switcher, because the stupid toggled power

The program is sending commands which is why you see it in debugger. That doesn't mean your wiring is correct. If you want to see if the com port is actually transmitting, tie pin 2 to pin 3 and you

Thanks for the reply. I am using AV2. I am using one of the com port in my C2COM-3 card, and C2COM serial driver. I assumed 2 & 3 are tx and rx. The cable I am using is a crossover. I verified only 2

+1 to Lode LS1! Just doesn’t have all the sources built in, but the control is spot on. Our latest customers wanted all the sources over control though. They are ok with favorites and they are ok

Thanks, All! 1. I was using the Crestron gen4 IR driver that has worked on other project 2. Couldn't (Wouldn't?) use CEC as it was just a one-room system ATV>AVR>TV We swapped the problem unit with

I have programmed a few systems with Sonos as the main audio endpoint (connect, Play and Soundbars) and had full control through Lode Audio's LS1 http://www.lodeaudio.com/lode-for-sonos-2/

I had similar issue a few weeks ago, with the Panasonic pro av control module. The way I had resolved it was to first comment the module out in the SIMPL windows, upload the file and restart the

Sounds like it could already be paired to a remote, this sometimes prevents standard ir control. Follow this link https://support.apple.com/en-gb/HT201254 Luke Crestron@...> wrote:

Has anyone used the Panasonic Pro AV Control v1.1 module from Application Market? It seems to be causing the program I use it in to reboot. I get the following errors: Error: splusmanagerapp.exe [App

Not had any trouble installing this.

IMO, With DM firmware if it ain’t broke don’t try to break it. If you’re having a specific problem, by all means update the FW, but if everything is working fine I would not be inclined to

"rx always return as "empty" at toolbox" You didn't say what kind of processor you're working with. Depending on the model, using a "standard" cable could be your downfall. If you have pins 1, 4, 6

You're right - looks like Control4 is only controlling now playing and launching favorites - but it has the TUNE-IN app built in so that navigates well. Guess we will have to cross our fingers that

There's also an IP driver in the modules section that I've been using for quite some time now.