开云体育

Go into the web GUI of the projector and send any command from the Roomview page. That should wake it up instantly. I've only seen Epsons act this way but I haven't found any other way to reconnect

It's that time again. GreenPoint TDI is growing and searching for new team members. Looking for seasoned Crestron Masters programmers that can work large scale commercial projects from start to

So I've got a couple RV Connected Christie Projectors that have been connected to a PRO3 for a year or more. Using the Rv Connected Display Module in the Program to communicate with the projectors.

"You really want it to be as close to 1 as possible, not 0" Gah - you're right - typo'd! - Chip

This works! Thank you Peter and Andrew for taking the time. I was about to tell them they'll have to buy a RMC3.... Heather Baiman Head of Programming Electronic Environments 247 West 37 Street, Suite

The Apple TV itself has no volume control. The remote sends IR commands to whatever device you set up in the settings (I.e TV, Soundbar, Reciever)

Hey all, Just wondering if it is possible to add more than one pyng-hub to a single residence. The reason being is that I am over 200 devices. I am thinking about doing 1 Pyng for all the lights and a

If You change HTTP from 1.1 to 1.0 the response will not be chunged. Another plus is, the connection will be closed by server. That means, full response is stored in "Tides.socketrxbuf" at the

I added the threadsafe, and it worked only once for me :( http://tinypic.com/r/168hef4/9 Heather Baiman Head of Programming Electronic Environments 247 West 37 Street, Suite 704, NY NY 10018 Office:

IIRC, the only button on the remote that will turn it on is Power. But I can double check when I get home later to see if Play or one of the direct input commands will turn it on. Keep in mind that

The "Play" command is generally a discrete ON for all the players I've ever encountered. You could then possibly use the "Toggle Power" command as an "Off" command. Frankly, utilizing the Play command

You really want it to be as close to 1 as possible, not 0. A pure resistive system will have a power factor of 1, while a purely reactive system will have a power factor of 0. The closer to 0 you get,

"Lincoln you are way over thinking it. Go to the basics Volts X Amps = Watts. If you know 2 of them you can get the 3rd. In your case you Know the volts and watts. Watts ÷ Volts = Amps." I'm tapping

I have a large table and using polycom ceiling mics. Just need a simple toggle function mute button. Maybe a digital out or relay to feed RMC3? TIA

Lincoln you are way over thinking it. Go to the basics Volts X Amps = Watts. If you know 2 of them you can get the 3rd. In your case you Know the volts and watts. Watts ÷ Volts = Amps. Example 0.8A X

There are not Discrete power commands for the HA-1, I already looked into it. Jon Sent from my pocket computer

I contacted Oppo and they suggested the HA-1 codes "might" work. Also informed me that the Sonica DAC doesn't come with a remote (!). If you have access to Oppo beta stuff I'd appreciate you checking.

You might also have better luck changing over to the while(1) gather method for both 2 and 3-series.

Thanks for checking. Want to trade :) Crestron@...> wrote: -- Chuck Perkins, CTS, DMC-E-4K ECS Certified EAVA Certified Instructional Support Technician AV Design and Programming SUNY

The relays are working on my HD-XSPA v1.2219.00028. Both the digital in and the FB out work as one would expect. Jim Felderman ControlWorks Consulting, LLC 440.449.1100 x1101 Crestron Services