开云体育

I using the free version of the app, but the numbers you noted are all correct and have been checked several times. The thing I don't understand is that this was working flawlessly for years and only

There are multiple platforms…specifically, * Mobil Pro: * Make sure the assigned Ports are correct…iPhone * HTTP Port = 80 * Port A =41790 * Port B = 41790 * PW: ?? iPad: iPad uses Ports 41792 You

v1.501.2867.25137 The other commonality to note between my 2 systems and the one noted in this thread, is that the AV program is running in SLOT 2. How are your program SLOTS populated?

Hello, I have been using the Crestron Mobile app for several years without a problem. Over the past month or so the app now says "platform not supported" when I try to access it through my iphone 6.

My system and 5 others ALL use MC3s with the Sonos module with zero issues, 100% stable. What's the firmware on the processor?

Is this on an MC3? I am having the EXACT same issue, the only common denominator I can figure is that its an MC3 at my showroom and my house. The one location I am running a PRO3, its 100% stable.

It has to swivel over 300 degrees? Crestron@...> wrote:

I can consider that. aluminum rear cover. But what about the mount? Not sure Sanus, Chief, Omnimount, etc is the best option to swivel over 300 degrees. Not sure brands are out there.

I've never seen one with a complete back to hide the TV. Think you might have to do a little fabrication. Find a local metal shop that could make you a cover out of aluminum keeping the weight down.

Hi all! Been doing mostly commercial work for a the past 8 years, but have a resi job that the client wishes for TV to be ceiling mounted over a kitchen sink counter with the ability to swivel around

So basically there's a hidden variable somewhere for the last value *you* set, not the widget's current value, and it ignores you if you set/unset the same value, even if it's different from the

Well, the reason I am using % values is that is what the lighting processor I am talking to is expecting. RSD from a different programmer. If I store and recall 0d and 1d on a range up to 65535, I'd

I think you jinxed me! I haven't had this problem recently and, today, I had to delete that folder every time I compiled one of my programs.

Bingo, thanks Steve. I had already tried moving the project to a folder that had a shorter path (thinking it might be filename length issue or something), and that didn't work, probably because I

Have you tried deleting the SPlsWork folder and then recompiling? I've seen this happen with other dll files and that usually fixes the issue.

Digging up an old thread, has anyone else got a compiler error when compiling using the TV Presets SG. It seems the Simpl compiler keeps giving me an error: SIMPL+: C# - Compiled with errors for

What Lincoln said. In this situation, things were properly VLAN'd by the customer's IT Department. There was a Crestron VLAN, with a subnet per floor with the size of the subnet determined by the

Only slightly older than the TP in question.

However the utility of that API may be very limited. For example, the whiteboxed Hikvision NVR/DVR I have at home has an exceptionally well documented API via HTTP [it also has a virtually entirely

This has actually become the typical approach for many of my clients – the Cisco 8- and 12-port fan-less switches work particularly well in this case. Though it is a little awkward trying to explain