开云体育

I think you could learn a lot using the CP2 and the Smart Graphics X-Panel.

I've found with Marantz, if it has an RJ45 connector, it's controllable. It could very well be Crestron Connected.

Anyone know if these are ip controllable before I call and sit on hold? Couldn't find protocol on product page, but it is controllable via the Marantz app. Thanks in advance! Chris Marantz US |

Totally agree with Steve. Learning on what you have will not help you moving forward. You need a 3 series processor and a Smart Graphics panel.

Which changes made it function?

Crestron@...> wrote: No idea. We've tried every combination of wiring after the diagram Haivision gave us for a 3.5mm TRS to IR bud didn't work (even though it was an IR bud cable diagram,

You'll be able to learn the basics with what you have but the gear you have is outdated. You'd be better off with an RMC3 and working with a Smart Graphic XPanel though.

Many thanks crestron_programmer. I have it working...

Hi Lincoln, I'm from Melbourne and can prob think of a few things, I'll pm you with some suggestions. Cheers Matt Z

Depends what you're in to - culture or thrills & spills The BlueCog 'factory' tour could be a Crestron lovers wonderland ;-) Cheers Phil

Do you need to strip out the 38(?)kHz IR carrier if you're plugging directly into the unit? Cheers Phil.

Anyone ever control one of these? http://www.veeder.com/us/products/tls-automatic-tank-gauge-systems/atg-tls-consoles/tls-300ci-automatic-tank-gauges

Your MAC Address should look like this "00\x26\x18\xC1\x61\x62" not like this "\x00\x26\x18\xc1\x61\x62" (minus the quotes of course). Your IP address should be "10.1.1.255" in the UDP communications

I am hoping that someone can help with this as I am pulling my hair out trying to configure the module. I have a HTPC on a static ip of 10.1.1.130 on a 255.255.255.0 subnet. The PC is set up for WOL

The girlfriend and I will be visiting Eastern Australia for our 5th anniversary in mid-March (Starting in Sydney, a couple days in Cairns, and finishing in Melbourne after driving the Great Ocean Road

I've never controlled Paradigm from Crestron, but have from AMX, and the protocol is very well documented and pretty simple to use if you want to roll your own module depending on how much you need it

I am about to tap into one of these myself. You find anything in your process that might be helpful? Thanks

We have a huge DMX system with a module for the ETC Mosaic controller including feedback. But it was a custom module written by Michael Block from Block-o-Matic that frequents this group. Try emailing

Does anyone have a module or any experience with the paradigm protocol for ETC lighting? Thanks in advance. J.

I am having the same problem with a DM 16x16 right now. I switched from a 15' USB cable to a 1' AB cable and a 15' USB amplified extender cable and it connected immediately. Doug Guth CTS, DMC-E, BSBE