开云体育

Thanks for your response. The problem is that client don't want to get it through any other device or app. bcoz they will not allow anyone to any new device which is physically viewable and is not

we have simpl+ module that works well for the last 2 years

Check out VoicePod: http://www.voicepod.com/ Standalone (non-Internet) voice recognition for pre-configured phrases, with a 232 connection for control system integration. Crestron@...>

Dear All, I'm currently working on a project of a telecom company to design the AV system in their Board room. My client requires Voice recognition for the controls from i-pad or Touch panel even very

Can someone did this thing working? I cant make it to work. even i calibrate the CT still not working. Then strange thing is, the code that i put always change the end character once i refresh the

Java - WTF? It's staggering the misinformation that gets bandied about. It was an Adobe Flash update that has been fixed for two weeks now. People should be UPGRADING.

there is also known issue with the latest java update, you will need to reinstall an older version than the latest

See if you have more than one theme in the project settings. If you do, try and only do 1. A combination of that and uninstalling / reinstalling VT worked for me.

There are a number of ways depending on how you want to go about it… Quasi-automated way is to in Toolbox open the Network Device Tree view and the SIMPL Windows Program view and link the two (right

I enter the serial number of each keypad into D3. Then in network setup it will find the keypads and apply the ID to them based on their serial numbers.

So, I have never really worked on larger lighting systems. Which is to be said that I only had to ID a few devices at a time. I know there has to be an easier way to walk into a project that my techs

Yes, working nice for me Crestron@...> a écrit : had no luck. > >

I just got ours today. It does not get configured through Toolbox, it uses a webpage ? Seems to be working so far though. (I only have one TSTAT connected to it) Sent: Friday, January 08, 2016 7:48

Did you ever get IP control working? I am trying the same thing and have had no luck.

I have done some controls over serial just not over ip using udp.

"The module for the HE-120" There's an HE-120 IP module somewhere? I just need preset recall on a 130, so it looks like I don't need to worry about the P/T issues... Thanks, - Chip

It was a Windows 10 update that caused a problem for me with VTPRO-E. Try uninstalling recent Windows updates in control panel.

Yes, did that in a room combining scenario with 3 rooms and 3 DMPS3-300...talked to support, just to be sure PoE would not be an issue. As previous user said, be sure to enable private network mode.

Hi guys Don't worry about sending the SIMPL + source, I wrote my own module. Thanks anyways James

RMA - She's a bust!