开云体育

I'd like to start a thread about your thoughts on Security Best Practices, specifically as it pertains to remote access via Crestron App. Let's start off by stating the obvious: 1. Leaving ports open

Has anyone tried to control a Sharp PN-L703B interactive tv? i can send it direct 232 commands from a terminal program on my computer but when i put those same commands into a crestron program i can't

You might want to make sure toolbox is set of open as administrator. Sometimes windows does not let programs write to the certain directories. Also you can tell it to save it to the desktop then

I just learned a driver with toolbox, used to always use Deal. When I rebuild the database, it doesn't show up. When you open it up in Toolbox, the icon shows a little lock next to it. What gives?

I have been trying to control my Roku 3s at home with the various IP Roku modules I have found on the group here. On each of them, I get no response from the Roku. Is there something I'm supposed to

Hi Heather, Were you able to find a solution to this problem? I'll be working on one of these Krell Foundations soon and would appreciate any feedback you might offer. Thank you, -K

If the cable reel is actually rated at Cat6 – there should be no problems at all. Have you tried certifying both the reel as a standalone device and as part of the entire run? If it fails it should

Is it possible to get a DM 8G+ signal to pass over a Cat 6 rated retractable cable reel. We have one here for a test and we are not getting a DM link light. Here is the reel that we are testing

For future reference, I've fixed this in the past by using file manager to delete everything in the html folder, restarting the websever using the console command (CORE3WEBSERVER or something), then

There's no point in using two buttons. You need to use an advanced button instead of the standard button.

You'll also want to make sure the show control feedback box is checked. Nate

It depends on if you are using the old style system or Smartgraphics as to how to do it. If you're using the classic touchpanel you just double click it and change the active color If you're using

Before I get reprimanded for not searching properly, I changed my search phrasing and discovered that I could create a second button on top of the original button with a different visibility join.

Hello everybody, I am not sure if this exact question has been asked, I have not seen this topic on a search either. So here goes. I am still new to programming and I have been asked to alter an

Both apps use the same URL. They should fix this, but they probably assume that no end users would have both apps installed.

OK, so for this room I have had to set the max dimming level to just under full to resolve the issue. Thanks

Hi all, client has updated iPad3 to latest IOS and now the horizontal scrolling list in Mobile Pro is very flakey. Its almost impossible to scroll with a normal swipe, however the buttons work fine.

i tried mirage://192.168.1.58/?callback=crestron:// it goes to CRESTRON Mobile Pro not CRESTRON APP. Whats the callback address of CRESTRON APP?

I should have read down further.... The zoom direction is combined with the speed, unlike the pan and tilt. The first 4 bits represent the direction, the lat 4 the speed. If it's \x24 the camera

I created my own Visca module a while back and haven't looked back. You can do everything in Simpl really easily (though I do store presets on the camera, not the control system). I also like to have