开云体育

NVRAMREBOOT ON

FYI, we ran across a TV last week (UN46ES7500F) that would only respond to "off" commands from a 1-way 232 port, not from a full COM port. Maybe EX-Link expects TTL levels and gets overdriven by

SIMPL# only interacts with SIMPL+ as currently designed. I was told this is because the SIMPL/SIMPL+ bridge is well tested and they didn't want to disturb it or add more complexity there. SIMPL# Pro

2008 and 2010 will live side by side peacefully. It does need to be the Professional version of VS2008, which is available through an MSDN subscription. This requirement is because Microsoft does not

http://www.crestron.com/downloads/application_diagrams/293/hd-ext1-c.pdf IR in at the TX, out at the RX. Should work with 1-way 232, but most likely will not work in the reverse direction. I don't see

Aahh good old F1 - should have checked there first! Cheers

I use an animation with the (6) states. I overlay the 5 transparent buttons onto the animation. Unit an analog value from each button press to drive the animation to the state you want. Then I use a

That's pretty much how I do it. Circle graphic with rectangle buttons overlaying it. I do each direction and select in the middle. I put a little green or red icon in the middle of each direction to

There is a change in character encoding. With a 3-series you can have ASCII and UTF16. If you are using UTF16, you need to put in 2 bytes to represent 1 character. To make it more 2-series compatible,

We spent a bit of time looking into this for a potential hotel job, and it really wasn't worth it. Fundamentally it's based around the MLX-3 style UI (i.e. not very configurable) so you can't even

I've started using VS2010 express for basic programming. Do I need to uninstall it to use VS2008? Must it also be the pro version of VS2008?

Hello everyone, Is it possible to store the log before it happens a restart? Can I understand the reason for the restart of a processor? Thanks a lot

That's a good question for Andrew, but I think it's flexible and can be used many ways. I think at masters, they said the entire program "could" be done in SIMPL#, but that may have changed... mb

I'm trying to figure out a simple fix for what should be a simple problem. I have a client that would like local talk radio in several of their houses that would normally be available on AM radio. At

Correct. There is (are?) some element(s) required by the 3-series flavor of Windows OS that only exists in 2008, if I recall correctly... - Chip

I'm trying to figure out the best way to use a circular d-pad in a non-core3 system. Think something like what's on a Roku remote: http://imageshack.us/a/img4/7103/rokuremote.jpg I can build the

Just wanted to make 100% sure that we have to use Visual Studio 2008 Professional, with Service Pack 1 installed, not 2010? tx

Hardest part is making sure you don't mistakenly try using the same com port or IPID between two programs. (With the obvious exception that 127.0.0.2 EISCs *must* share the same IPID if you're trying

Got it. Thanks Nick and address a

Has anyone tried Matt's module with this set? Is there discrete inputs available Thanks Harvey