开云体育

just out of interest has anyone experienced any lockups with the mlx-3 on the mc3? panel comes unresponsive and then you have to reboot the gway to or pull the batteries on the panel to get it to work

Some of Crestron's touchpanels use Compact Flash cards to store the OS. You could open it up and look to see if it's been disconnected/removed from it's slot. That was also one of the first TPs that

Did you delete the SPIsWork folder and Recompile All?

Thanks all for your great help. I have less than 20 modules in my program. I will try the 7.4 upgrade first. OP

try to operate the initialize command from the text console ________________________________ To: Crestron@... Sent: Tuesday, May 14, 2013 12:21 AM Subject: [Crestron] Re: AV2 rebooting

I have had the exact same issue before. It was the simpl+ in the program that my av2 did not like. I used some older versions of the modules that had less simpl+ and all was good. This was a first gen

Hi All, I may have a client who is a B&O fanboy. I haven't dealt with them for at least 15 years, and it wasn't very good then. Love to hear the good, bad and ugly with integrating various B&O

Okay so far I have tried all the options: 1. initialize the processor 2. upload a blank program 3. unplug & replug ethernet and cresnet 4. reload of the program. The Internal memory of processor is

Did you try to take out the battery and return it back after 30 seconds?

I was just informed that I job I am going switched from HDX to realpresence and it sounds like I will be running into this same issue. Have you found a solution.

fixed that issue. I can open the port now. Thanks!

With more than around 250 modules of either Level Control or On-Off Control, we find out some problem in the 'Send Name' logic (not sure if problem was solve with version 7.4). If not too late or too

Hello I have in my private rooms an old TPMC-10. Today i want du update my programming - annything go's wrong, now the TPMC-10 bootscreen apears, then the Display turn Black with the mice cursor and

Thanks for the info. It is appreciated -- Jason

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /Modules/Biamp AudiaFlex v3 (TA).zip Uploaded by : programmix

It will be in the 5.2 release which should be coming soon. Currently its a release candidate in Labs.

Anyone figured out how to generate a project document (screenshots) for a Core3 project in VTPro-e? Thanks.

For the TCP Server, that address actually is a list of all the allowed devices that can connect to the TCP Server. Right now, you're only allowing a device at 192.168.0.3 to connect. Most of the time,

We had that problem with the 7.2 modules and moved to 7.4 and that seemed to resolve the issue. Matt

I second that. I really dislike the Crestron Module. I just write my own S+ module to do what I want it to do for that particular job. Then modify it as needed for future jobs. It's usually just a