开云体育

Hello I have in my private rooms an old TPMC-10. Today i want du update my programming - annything go's wrong, now the TPMC-10 bootscreen apears, then the Display turn Black with the mice cursor and

Thanks for the info. It is appreciated -- Jason

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /Modules/Biamp AudiaFlex v3 (TA).zip Uploaded by : programmix

It will be in the 5.2 release which should be coming soon. Currently its a release candidate in Labs.

Anyone figured out how to generate a project document (screenshots) for a Core3 project in VTPro-e? Thanks.

For the TCP Server, that address actually is a list of all the allowed devices that can connect to the TCP Server. Right now, you're only allowing a device at 192.168.0.3 to connect. Most of the time,

We had that problem with the 7.2 modules and moved to 7.4 and that seemed to resolve the issue. Matt

I second that. I really dislike the Crestron Module. I just write my own S+ module to do what I want it to do for that particular job. Then modify it as needed for future jobs. It's usually just a

Unless you want to restrict connections to a TCP server, you should specify the address as 0.0.0.0. Any other value will restrict it to only accept connections from the IP you specify.

The biamp modules from crestron are in general difficult. I found easier to simply make my own. The protocol is simple. You will have 100 percent reliability and clean feedback. Done this with up to

I don't know about the 7.2 modules, but the Command Processor other versions (including 5 and at least some in the 7.x chain) have really bad queue management, in that there is no timeout on a

It shows 192.168.0.3 (its static ip address) This is IP good because I use this address for html hosting and I just connected through the toolbox a second ago just to double check.

Subject line says it all. I have to revisit a job tomorrow where we have Biamp controlled serially (7.2 vintage modules). This was a new install last year. After some months of it being in operation,

On the TCP Server configuration (in the device tree list, select the server and press F6, or right click), what do you have for an IP address listed?

I'm working on getting away from the activex control for remote control so I created a TCP/IP server using simpl. I tried to using putty and open the port, but it would not open. I have uploaded an

We had this issue with a Pro2 and CP2E and we worked with Crestron engineers who said it was a firmware bug. They sent us a beta firmware that took care of the issue. Contact TB.

DSI Entertainment Systems is looking for a full time Control Systems Programmer. Programmer should be comfortable with commercial, residential, and lighting programming. Benefits include a competitive

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /Documents/Sony XBR55HX929 RS232 Protocol Manuals.zip Uploaded

I used the Media Player object for the first time last month, with several TSW panels, a couple of DGE-2's, and an X-Panel. We used it with an IDOC and CEN-TRACK (AM, FM, XM, and AUDIONET). Some of

Submitted it to TBTS