开云体育

Thought it was not easy, yes its like energy management with temperature data but also light, soil moisture and so on. I have a very crude module that kind of works but looks rubbish compared to a

To my knowledge there is not a way to plot graphs on a touch panel with simpl+ like you would in another language. I think that's where you are going with this, correct me if I'm wrong. You will need

Google Charts API is one option. Otherwise you're into custom Core3 control territory. pgrahamsley@...> wrote:

Makes all the difference. Airplay works amazing with a solid WIFI infrastructure. You can roam throughout the house etc. From: weddellkw <weddellkw@...<mailto:weddellkw@...>> Reply-To:

I'm wondering how many of the AirPlay problems I see (random disconnect, disconnect while roaming, AirPlay 'sink' not appearing in the list) are related to the small-biz class and lower network

Has anyone written or would know how to write a module or software combination for producing nice graphs on a touch panel/xpanel etc? I have various data points through bacnet/Modbus which took a

And actually something I was completely blissfully unaware of until recently -- the DM-MD6x6 and DM-MDx4 provide PoDM without any external hardware. But also note that neither a DM-RMC-SCALER-C nor a

To clarify, ?A TX -201 can be powered by POE using the injector at the DM or DMPS or locally. ? A scaler can only be powered locally and not POE. ________________________________ To:

Went to an event last week where they delivered product to local Kickstarter backers. The system actually is very impressive - it appears to be solid, and the UI is the best I've seen yet for

Thank you!

Doh! I hate it when I do things like that.

Yes. Only a DM frame will inject power (assuming you have a POE injector)

Had to pull out from a DM-6x6 this box. We replaced a RM-100 so the customer can open a Garage Door. ever since we installed the switched lockup in a matter of minutes and or Hours. we called TB a

Yes you need to provide power to both unit. {Paf} 2013/5/8 cyberbri24 <cyberbri24@...> [Non-text portions of this message have been removed]

If I power up the SCALER behind the monitor and run the 8G cable direct to the 201-C, do I need to power up from both ends? Havn;t tried yet as was hoping to not have to use the PS on the TX side.

There's a demo program with simpl and vtpro files in the roomview install directory after the complete setup.

Or did moving the WAPs to another room actually help the Ruckus, since it was then able to use beamforming to focus the radio energy in one general direction, towards all the devices, without worrying

Have not gotten around to testing it, but there is a "roomview complete demo" program on crestron website. It appears to contain the modules needed to do scheduling, but iirc it did not include UI

Look into Kanexpro. ?They have a new modular switcher series. ?I use their other gadgets and they seem to work really good. ?No problems. ________________________________ To:

I see 2 likely issues: 1: Projector does not like 1600x1200. The projector is simply not capable of this. The manual will state the projectors capabilities. 2: Marginal wire. You have a wire that is