开云体育

That's a pro <cough> model that uses their MDC protocol - have you been trying it with the consumer modules/codes? - Chip

Not done on the panel itself. The TOGGLE symbol in SIMPL Windows is what you're looking for... - Chip

I am having some issues with toggle buttons. Where is a button configured to be a toggle? is this done with VT-PRO, or is it done with a toggle command in SIMPL?

Well, the 722 is capable of network control. I do KNOW that. There is an app out there for both android and IOS devices. Have you tried using a network tracing tool such as wire shark to trace the

I have had the same problem with Panasonic projectors. They tell me that Crestron is working to resolve the problem.

Tying to control model PH63KPFLBF I have grabbed rs232 modules out of the file sections none of the seem to work. Does anyone have RS232 codes for this model? the tv ID is 01. Thanks in advance

LG tv will only respond to and turn on with CEC command, but will not turn off with CEC command so would need to use serial or IR to power off. Samsung CEC works great for both power on and power off

Hi, I am having some trouble with some basic lighting logic. I have a DIM4RF controlling a main light in a kitchen and another DIM1RF controlling a set of undercabinet lights. The Controller is a

Other thing i forgot, do you have roombox connected on the client network? Rstp {Paf} Le 19 mars 2013 16:06, "Tray" <trayschaeffer@...> a 閏rit : [Non-text portions of this message have been

Let us know Jon, could benefit a lot of people!

IT has its own IP since it has wifi. Ill try it out when I get a chance and report back. currently my roku stick us connected to my Oppo 103, but I could move it to my onkyo 818 and try it there.

I use and MX-850 with an RF gateway on one room. In the other I have an MX-980 with MSC-400 and RF gateway. That one has variables so it keeps better track of power, inputs, etc. Nicer system. I also

If you get a chance please report your findings on this part. Quirks, etc. I may have one of these in my hands next month and any heads up on integrating this piece would help. Thanks, cyberbri

Have you attempted to use a USB cable direct to the DM frame yet to see if the enternet settings was lossed? Check to make sure it still has the same settings as well as the IP table info. Good luck.

But, it needs it's own IP address to send commands to, so probably not now that I think about it for a moment.

No idea, but you could tell us. :-)

Hello I have a crashed HDD too. Before the HDD crashed totally, I saved the first partition particular. I hope everyone can share an image of a AAS HDD. I have a AAS-4 at home best regard Strohland

any idea if it works with the roku stick?

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /Modules/Roku 3 Release 031913.zip Uploaded by :

I'll be uploading a module for the Roku 3 (and maybe others, don't know), that queries subscribed services and spits them out to a string array. Selecting the corresponding input array will launch the