开云体育

You best bet is to use parallel sets of crosspoints a for different kinds of logic (AV, lighting, HVAC, etc.) That means a separate ECCONNECT for each set of crosspoints. I typically use a CCROSS for

I'm trying to figure out if my issues are in my theory, programming, or both. I use crosspoints well in a one to one situation. My question is, can I use one ccross to connect to a few ecross

The built in gateway can be shared; each program can reference it's own set of RF ID's (can't use the same RF ID between programs). External gateways are unique to a given program. Can't be shared (No

Can I share gateways between programs in 3 series processors? Scenario 1: (2) MLX-3's (each running on different programs in the MC3)from the built in gateway, with different RF-IDs. Scenario 2: (2)

Make sure you have the latest released firmware for the DMPS-300 and the latest released databases as well. John Pavlik Crestron Electronics, Inc. Director, Architecture & Design Sent: Monday,

I would look at Ebay, lots of nice deals there.

I am looking for a used 2 series processor to be used to drive some lighting at my house. I f anyone has a unit laying around an is in need of some quick cash, drop me a noe and we can discuss. Thanks

Does anyone know if the freezing issues have been fixed? I have been programming quite a lot of DMPS-300 and I am noticing long lengths of freezing when opening, compiling, saving etc.

Yes, this works without any problems. From: Crestron@... [mailto:Crestron@...] On Behalf Of metdeathx Sent: Saturday, December 22, 2012 7:12 PM To: Crestron@...

Samsung UN65ES8000

Which DI box do you have? Are you using a balanced output? How are you wiring that to an RCA? Typically you'd tie - and ground (pins 1 & 3 in an XLR) together for the RCA ground. Chris

My 42" LG has it and the protocol works well enough. I want to put a 65" in the family room and would like serial for that also. I don't see any new ones that list that they have it even if it's

I would say start trouble shooting the audio playing first. Plug the output Into something you know works to make sure it plays your wav then once that is good then troubleshoot timing issues. Nick

Yes. There is a delay. I just did this with AAE's instead of bipad but I had to put 2 seconds of dead air at the beginning of my mp3. I played mine off of an mc3. Sent from my iBerryRex. RAWR

I'm using a C2N-IIF loaded with a WAV file to drive the local doorbell speaker of the C2N-IIF as well as feeding the speaker audio from the C2N-IIF back into the house into a BIPAD. On my test bench

Page rendering performance seems to be lacking, so I am looking at ways to make page flips faster. To get this out of the way...I never use page transitions so that is not the problem. I've noticed

Howdy, 1st, I have only been a member for 2 weeks or so and have learned a ton on this site, so thanks mods and members. Much Appreciated. I am working on an MTX-3 and have a question about the system

Thanks, I figured it was an easy fix.

Thank you Tony Golden! You gave me the clue I needed, that the Mobile pro symbol was under Ethernet touch panels. I looked all over simpl and just could not find it. Once I used that symbol everything

You are welcome to alter the one that I posted, quite a while back, for the LC-65xxxx From: Crestron@... [mailto:Crestron@...] On Behalf Of jcdigitalmethod Sent: Saturday,