开云体育

Thanks Chip. I'll let it slide, since everything is still working. HAHA

I knew that was a stupid response as soon as I hit enter. I'll get the real serial number tonight when I get home. Thanks for the help. Brian

Try FFFFFFFF... :) (Sorry, couldn't resist) - Chip

I would get the actual serial if you can. It will let you enter anything and if you're not able to get to it and just want the TSID error to go away, enter the serial of an existing device but

I can get to that, but can I just pick any number and change it? Or does there have to be a specific number/letter combination?

In toolbox, you should be able to set the serial number. This will change the TSID.

There is also a command that can be directly sent to the codec to set the presentation source. It is good practice to send this on the startup of the system. Also good practice to configure the input

I don't see any conflicts, but is there a way to change the FFFFFFFF? Thanks Brian

Also if you have daisy chained cameras to get the correct firmware uploaded you must have it as camera 1. You also must make sure when controlling serially to have the serial password turned off.

Glad to hear it was resolved :) -Stig

Hi All, Well, we had a great first round. Before I go to EBAY, I thought I'd reduce a bunch of prices and see if you all will give the list another pass. Big price drops, good stuff cheap!! Here's the

More important, do you have any devices with conflicing TSID? More than 1 device with FFFFFFFF? If not, you can safely ignore this. TSID can help you resolve ID conflicts on Cresnet, if any. Yes, It's

In pays to be patient !!!! That's the ticket. Thanks for all the help. Hope this thread helps others in the future as I think I just about ran the gambit on issues with these codecs. But all is

Its been over a year since I dealt with one of these. Have you got the correct port settings on your TCP/IP client? And correct target IP address? The PDC protocol might have changed since then, but

Thanks, I haven't noticed any change in the operation of the pvid. I just saw it was grayed out on my network treee and non of the other pieces showed that I was just curious. Brian

As far as I know you can safely ignore TSIDs unless you actually want to use Touch-and-Set to assign Cresnet IDs, which I'm not sure is even supported anymore. I've never used it, can't say for sure,

The camera will "self upgrade" if needed, as soon as you connect it to the codec with the default camera cable, and do a power-cycle on it. this process will take a couple of minutes and yuou can

I want to see if anyone can firm a string structure for Pixelnet. This is what I am using to recall a Layout with no luck as of yet. Can anyone confirm? This is the exact format as I have in the SIO

Hello, I have a Pro2 system and a PVID8x4 attached to it. Yesterday I ran the Network Device Tree view and found the PVID is the only unit now showing an invalid TSID. The current setting shows a TSID

Okay, Pulled the camera down where I could work with it and plugged the control cable(that came with the camera) into the camera control port of the codec. Power cycling the camera will allow me to