开云体育

I just opened up a tstat panel and I have no idea what symbol/letter/number cretsron used to get it. But my thinking is you could copy and paste it into simpl to add on to the end of the string. It

If I use ASCII 248 on a TP (or Crestron Mobile in this case) I get an empty-set, or null symbol, not a degree like I expect. Is it possible to get a degree symbol on a TP or Mobile? Thanks, Heath

If this is an analog - 751 represents 75.1 - a DivMod by 10 will chop off the decimal. Ignore the remainder output. It doesn't round up though.

If you don't care about the tenths at all, just run it through a DIVMOD... - Chip

If you dig through the Crestron TSTAT module, you will find a piece of simpl+ that does this for you (rounds to the nearest whole number) ________________________________ Sent: Sun 9/16/2012 2:17 PM

Hi all, I just changed my house from a HAI thermostat that output nice even numbers like 74 or 76 degrees to the CHV-TSTAT and it outputs 74.3 or 75.1 Is there an easy thing like a ascale with the

The really great part is he did not password protect the module, so you can at least go in and make adjustments for your needs. I thank those that do not password the modules, so others can modify and

I was googing the for a spec sheet on a Leviton product I was considering to tidy up the CATV DEMAC and I came across a division 16 construction spec. That looks pretty normal. Until you get to

On second thought, try a restore on it and maybe reloading firmware. I am not sure, but doesn't it turn on if an input is changed also? You could do a massive buffer so the unit will not get any

It is possessed! But seriously, probably a bad unit. I have an LG lcd tv in my bedroom that turns itself on. This behavior is not consistent and it may go weeks without doing it and then will be on

Was wondering if anyone else has had issues with a PSPHD switching itself on at strange times. I have one on site that has twice now switched itself on in the middle of the night. I have double

That's right. There is no comunication/fb from the OSD menu state and back to the API we have access to, and we can only use the IR emulation codes to control the OSD hierarchy menu. Their philosophy

It does not. For reasons they aren't sharing with anyone, Cisco decided that no one needed the ability to navigate directly to any screen via API. I've had several clients ask for the same/similar -

I've managed to get the ATV back up-and-running by disconnecting the LAN cable and streaming via Wi-Fi, thus not being controlled from Crestron. I could then access the Maintenance menu again, ext. I

Hi, I tested your module this morning and it works great. The only thing I found was that ffwd and rew didn't properly work while listening to music and scrolling up and down required multiple

without digging through the API, I would have to say no to a direct command. I don't remember running across this, but I have not looked either. I do seem to remember Polycom having some commands to

Hi All, I've just picked up a new client renting a very nice condo with C4 in it, and he's having some odd problems I need help working through. Are there any C4 programmers available in Los Angeles

Thanks for clarifying Rob.

SIMPL is not translated to C# it is it's own custom logic processing "engine" that is written in C++. SIMPL+ is translated to C#... maybe that's what people are thinking.

Does anyone know if the Tandberg C60 has the ability to be forced to specific screens? I have a client that wants to be able to start right on the dialing or recent calls page. We don't want to try