开云体育

DisplayLink is free, but the lag is bad enough that I don't usually want anything more than an e-mail or IM window on my iPad. PDF drawings are right out due to redraw times. Occasionally it won't see

I notice there's an IR file but would like to control this unit via 232, there's nothing on the modules on crestron site.

I don't get it right every time, but writing out a few sample characters on paper with position numbers under them can make it a lot more likely to work on the first try. For this example you might

I did it both ways and still same result. I'm using 80d on the port. Actually built a quick TCP module with direct sockets and got same results. Here is a picture of my debugger.

Hello all Does anyone have the discrete POWER ON and POWER OFF commands for the latest (2012) models Panasonic LED televisions (E5, E50 series)? The power toggle command works from the most recent ir

What exactly are you putting in the address field of the TCP/IP client symbol? "www.yahoo.com" or "yahoo.com"? Those resolve to two different IP addresses, so putting the wrong one in will get you bad

I second the request. Thanks, Trey From: Crestron@... [mailto:Crestron@...] On Behalf Of Mark Chytka Sent: Wednesday, June 13, 2012 6:00 PM To: Crestron@...

Looking to integrate the 8800 into a system. Anyone know if the 8870 partner module will run this Tstat? I also don't see any means to setup the weekly schedule from Crestron. HVAC guy needs three

For rough-cutting the whole assembly, I use telecom shears. Takes a few cuts, but they get through without too much struggle. Does anyone know why the telecom industry likes scissors versus other

So I am also in need of an iPad dynamic preset module. Can someone tell me the current status? Thanks much!

I'm doing my first DM fiber job. Installers will be running Crestron 8G Fiber (4 fibers in asingle jacket) off of 500 foot rools. What is the proper tool for cutting the cable? I have the Kevlar

Yes, and I have seen this issue also. Also, TB could not explain this behavior and I sent them my program and they were seeing what I was seeing. Fixed it by deleteing the offending pages, saving and

Not enough information. Are you using the MLX3 demo program where all is coded in VT-Pro? Is data from a common page but local sources work but global do not? Are these different pages or the same? I

Oops, I missed the "on" after the space character. I stand corrected, that would probably work fine! -Neil

What if there's a plural possesive in the title :P Ex: 'My Gay Fathers' Wedding' There's always an exception scenario. People who write protocols should know this and use special or unprintable

Your search string doesn't have to a single byte. But, it might be easier to use reversefind() if 's are included in the titles, I agree, but you don't HAVE to.

Or set marker1 to find the first occurance of ' and set marker2 to find '\x20on -Stig

I'm seeing a problem where the global outputs fire for a given button press but not the corresponding local-page output. From what I can tell and TB tells me, both should always fire when a button is

Hello Everyone, I was playing with a TCP/IP Client symbol and I noticed that I can't connect to a web server like yahoo.com and send a HTTP request. Here is my setup: - AV2 with 4.003.0015 (Oct 04

Lol. My last one was or the subscribed feedback of the new BiAmp Tesira level controls. "Program volume : tr.ue dB" Doh! -Neil Dorin [Non-text portions of this message have been removed]