开云体育

If you use a CP2 / CP2E as a slave to a MC3, the IR functions as it would if you programmed the CP2 / CP2E directly. It does not do the "one at a time" that the MC3 does.

our staffs laptop come apart once a year and we clean them when they start to act up and it always is related to dirt and grime on the heat sinks, and those being blocked I say that, but there is only

a warm laptop is a sign it is doing what it is supposed to do...get rid of the heat. Laptops tend to not run the fans very well on batteries, so I avoid intensive stuff unless I'm plugged into the

I've found that initializing an analog signal to a specific percentage with an init doesn't always reflect an equal value in the percent object of a mobile pro g project for iPad. init = 1% -> Percent

We use a Windows 2008 server for development located in our office. It's an HP dl360 server with 10gb of memory and dual processor 2.33 ghz Xeon quad core. Very fast and always available when onsite

Prodigy composer no longer supports system builder, system builder was causing big technical support issue volume. People would be fine in composer and when the got into system builder it would be

Not that I know of. When I asked TB about it they said, programs that used the prodigy composer couldn't be opened in SB but you could still build a prodigy system in SB from scratch without the

You would have to setup NAT routing to 'pass through' the processor.

Is it a feature that can be deselected ?

That's a feature of the new version of SB.

i use an ASUS G73S very good cooling mark

Here a document with thie list of functionnal command on a QDX6000 http://support.polycom.com/global/documents/support/setup_maintenance/products/video/QDX6000_API_Reference_Manual.pdf

Hi, Since i've updated SB to version 3.13.014, when i try to load a prodigy project in SB it's always open with the prodigy wizard. i'm unable to edit my project with the SB interface. Do you have an

Is the trafic on Port A is passed internaly to port B if the ports are connected in differenet V-lan

Did you try a "Recompile all" ? Alt+F12. -- Marc-Etienne HUNEAU Dark Side of the Room (DSR) +33 (0)6 615 516 90 http://www.dsr.fr Le 21 avr. 2012 � 19:16, Artur a 閏rit : [Non-text portions of this

Short Answer: Depends It has to do with what else on the network, how security conscious the user is, what ports, Nonstandard/VS Standard etc etc etc. That said I have several system that are port

Should someone only forward the required ports when they are expecting service/updates or should they leave them forwarded???

Anyone familiar with the commands differences between the QDX6000 and the HDX9000. Using the HDX TCPIP Module to control the QDX but quite a few of the commands dont really work, not been familiar

Cool! Thanks Sent: Saturday, April 21, 2012 11:26 AM To: Crestron@... Subject: Re: [Crestron] Re: CP3 Question A CP2E as an eslave to an MC3 will behave normally. It's only the MC3's

We should do that. Come up with a challenge and see who can solve it in the least number of symbols. Everybody shares their solution, and we all can learn little shortcuts and such from each other.