开云体育

That's a far reaching generalization to call that methodology anything like systembuilder. For a long time, I've shared a similar mentality to Barry's whereby it irritates me to no end how juvenile

For programming generally... in my experience just play with things: I have Crestron in my home not because it's cool (ok, not _only_ because its cool) but because I can try things without worrying

It's a real analog line or a module who convert an ip extension into an analog extension. i have seen this in the past and it was cause by the device who create the analog line.

For some reason I've been assigned the task of figuring out this issue and wondering if someone here can help out real quick. An older Vortex system was replaced with BSS and a new HDX8000, but the

No, I'm not thinking a code generator or any type of automated tool. I'm thinking more a framework of standards programmers could develop and agree to follow so that different programmers could

*tears*

Best "learn to program" website I've ever seen is www.codeyear.com The best part is there is NO videos!! Mark

"Handy reference here: Teach Yourself Programming in Ten Years: http://norvig.com/21-days.html" Now that was a good read lol. I'm a long time student of the school of hard knocks, and a proud

Yes, i've done this in the past to monitoring a device. you could write a little program to be able to change the communication setting and your all set. With a xpanel to adjust each parameter and

If you haven't dealt much with analog symbols I would start learning them. I program as much in analog as possible. It provides more power and flexibility. For instance, I NEVER use interlocks

Too true, too true...

Is there a way to add the CLI-120n-4 modules to D3 pro? ive been using simpl windows to control the modules but am interested in using d3 pro since i have a spare processor i could use for strictly

Handy reference here: Teach Yourself Programming in Ten Years: http://norvig.com/21-days.html Specific to Crestron, make sure you get to training classes, as they will teach you things that are

So you want to write another systembuilder?

So it goes both ways I see. :) Though buffers have their place, there are many times when buffers are so much easier than breaking out crosspoints that it makes sense to use them. It depends upon the

I seem to have had more IR problems with the DVR versions than the non-DVR ones. Gaffer's tape + a pinhole helped.

I have been programming for a few years but have not been in a position to do it full time, I am really a lead install tech that can also program. I would like some input from the group on how to

Thank you for all the help, the IR emitter had to be moved a couple of inches away from the eye ________________________________ To: Crestron@... Sent: Friday, April 13, 2012 7:50 AM

Does anyone have an RS-232 or IP module to control this unit? Thanks Don

Is the module completely Simpl+? Having not used a MC3 yet all I can tell you is that if you are using anything that uses ticks for timing it will cause timing issues. This is because a tick in the