开云体育

Well, not on ALL counts :-) Crestron Mobile can do animated page-flips. There's an option in the Properties setting of each page, or it can be set globally for the entire project.

It sounds like the button area needs to be cleaned, inside the panel. It could also be the very common "swollen battery" issue, as someone else mentioned. home based fixes. The "official" option is to

Any used this module yet and verify it works? Going to try it later today on site somewhere. It looks like its solid, although I wonder if you have to use an oscillator when ramping the vol up and

Sadly not - on all counts. I'd love the Crestron iPad app to support the features - such as the things you describe below - that are (IMHO) expected by today's users. If you'd be kind enough to raise

I'm guessing when he says "local" he means on the same subnet, rather than the processor itself being the webserver. A "real" webserver on the same network *should* be the optimal place to serve

Just to add to anecdotal evidence... I've also had problems with the CNRFGWA with RTI and, like Dan, the issue was foreign device interference. It took a while to track down, but it turned out that a

Hey Y'all, Just left a clients house who has a Dish DVR model Hopper2000. Any chance one of you guys has an IR file for it. The menu says IR is enabled but none of the older drivers work. Very new

Are you sure this isn't being caused by a swollen battery? Try removing the battery and see if the buttons feel normal.

Is it bad that I looked around for the "like" button....? -JOHN

I got a call from a dealer who is updating an older system and the client furnished a NAD Viso Five as the combo receiver/DVD player, to replace an old Sony receiver. Um, NAD, yeah I remember them

The Select button (middle button of the direction pad) on my TPMC 8x is very stiff and doesn't push in. If I wiggle it around it will loosen up and I can use it but after I stop using the remote for a

Sorry, I can't resist jumping on this soap box, I really hate SB. I have had so many bad experiences with it, just like this one, I hope I never again have to touch it. I have been there with the

If you want to make an iPad *work* like an iPad with Crestron software.... Don't use Crestron software :) You're not going to be able to do it with Mobile Pro G, save yourself the grief and deploy

Make sure you don't have any of your modules in the folder where you have your program. The newest version of simpl seems to dislike modules that are in the job folder if they are also in your

Autonomic has a client program called "Mirage Media Sync" that you would run on the PC's or Mac's that house the iTunes libraries that you would load music into. (PS forgot to mention in my earlier

There's a Crestron module for the Mitsubishi GB-24 and GB-50 controllers, if one of them can be used with that unit.

Try reinstallling Cross Compiler

The ush, usp and umc macros are all within the directories specificied in user preferences. Nonetheless, I am getting an error each time I try to compile that the compiler cannot locate the ush files.

Seem to have double databases and want to remove those that are in the projects folder. It seems as if my usrmacro folder has replicated itself within the projects module folder. I cannot locate this

if you still have access to the old XP computer, just copy the fonts to a thumb drive and move them over to your new computer font folder. From: Crestron@...