开云体育

Well, that?s what it actually says in the Tech Tips: “Wi-Fi roaming is not supported, as the TSR-310 is meant to be single room device.” Cheers, Thorsten Von: [email protected]

Oliver - I did check the phoenix wiring (the projector does turn on & off) and I even moved the phoenix connection from Com2 to Com1 (no change there). Simpl Debugger does show data arriving. Lastly,

What problems are people having with them ? I’ve got one and I roam the whole house ( 5 ubiquity access points ). I don’t seem to have any real issues.

Wow. That basically makes it a single room remote for the most part.

I should say; the module has other issues (the whole polling, warm/cool state timers are pretty nasty…) but that’s more an approach thing - it’ll work, it’s just not a great solution.

This is a complete guess but here goes… 1. since commands work, you know your com spec is ok, and com ports are com ports - they don’t work differently on different devices so I wouldn’t think

I've just done one, the IP control needed to be allowed on the display every time the code got updated, apart from that it works ok. We are switching to Art mode when off, then a press and hold of the

If you want to see the code from the module, here it is: #SYMBOL_NAME "ViewSonic PRO 8100 Parser and Poller" #CATEGORY "24" // Misc #DEFINE_CONSTANT POLL_INTERVAL 3000 // 5 minutes in tenths of

Hello, Here's my issue: I have an old ViewSonic PRO-8100 connected via RS-232 (port 2) which controlled the power off & on, showed me the lamp hours on my touch panels (Projector on...Lamp hours: 105)

So, I'm going to go down the rabbit hole for Samsung IP control, specifically with the Frame for this first try. 1. Is the consensus that the CCD/Pkg file approach the best/only way to do it? 2. is

We still have a some ADA Tune Suites still working. Can't recall having any issues with their products. Built really well.

Hey Miles, The file section had some Simpl+ code, not a full functioning module. If you can share one, I would really appreciate it. Thanks

Thanks Neil, Posted is Simpl+ code, mostly for parsing data. If you have a full module, I would really appreciate a copy.

Hi All, I have a site with some CHV stats, most with RTS/RTHS remote sensors. We think that we have seen issues with display offsets. We had set offsets ~ 1-2 year ago to compensate for variances. The

Recently my Sonos port and connect required a reset to factory settings. ?While the Sonos connect no longer displayed on our touch panels, the Sonos port would. ?We kept the Sonos connect because we

Hello, I'd like to build a project to run on Crestron Go for Ipad to control Crestron Procise PSPHD. Does anyone here have a Crestron Procise PSPHD and Crestron Go on an Ipad to control? I've recently

Or you can use a triggerable audio player(WAV, MP3) and page it through the speakers...

Ring where? At the 6L touchpanels? Load a sound in them and trigger the join # with an oscillator. No?

Hi guys, I need some old takers wisdom on this. setup: Bpt door bell connects to crestron via sip (I think) and the audio and video gets distributed to crestron touch panel 6PL via C2N-IADS30X24 and

We are using SMTP2Go and I just tested with port 587 and that works. so we are going to change to that port and IT guys are happy with that Thank you