开云体育

Tony, You might want to suggest using this module just for the arming/ disarming portion. Connects right to the keypad buss on the alarm panel and is rock solid. We use it on all our projects.

I'll try those out if I can't get it working. Thanks! -- Stephen H Programmer / Installation Technician

I found one about 5 months ago, in URC database learned into a C4 system from URC remote.

BTW...I obtained another programmers SIMPL code that contained an EVO IR file. It did not work on the Tivo model we had but it might work on the model you have? I just posted

The data sheet for the Evo Pro does specify a bluetooth only remote... EVOPRO_DS_031924.pdf ( https://evolutiondigital.com/wp-content/uploads/2024/05/EVOPRO_DS_031924.pdf ) whereas their model that

What's weird is I have another evo pro in place of where the 2nd ZeeVee cable box used to be, and currently I am throwing the old ZeeVee IR commands to it and they are doing things to control the Evo

Thank you very much for the information good sir, that would explain why I can't find a driver for them. -- Stephen H Programmer / Installation Technician

Hey Stephen, the new Evo Pro boxes don’t have IR sensors on them from what I can tell. The remotes that come with them are RF but it’s basically a Google/ Android TV running a cable app.

Hello fellow Crestron-ers, I am looking everywhere I can think of for an IR driver for a Evo Pro. Our client upgraded from ZeeVee cable boxes to Evo Pro IP1145HDW boxes. Does anybody have one

Any possibility I could check out anybody's module? We have an upcoming project that'll make use of an Alpha 213C and if I could shave time and not roll my own driver, it'd be awesome. Thanks!

Are you on an older version of firmware for the unit? I believe this was a bug that was resolved with firmware 4.0000.00057 from a couple of years ago.

Hi Rd, Do you have this module in an example program to share? Thank you

Hi Rd, Do you have this module in a example program to share? Thank you

Hello Group, We are trying to improve our Fusion SSI implementation. We are using the Fusion SSI V2.8.0 module with 3 and 4 series processor and v2.7.1 – 2 series only for 2 series. We are adding a

Thanks, guys!!

So in the end * init/restore * Then sending 2d to orientation Sorted. Thanks

I too had this concern and opened up a support chat. I was told that there are improvements for Simpl crestron systems as well as CH. I also expressed my frustration that release notes always only

Hello, Have you solved your problem yet? I have the same problem... I can't get my RMC4 to communicate with its com port set to RS485 and my RS485 RTS TRANSMITTER module. -- Lyes SAIFI

Just tested with my 770, you need to send 2d to bring it back to the correct orientation.

Eric, First of all, thanks for the code in Simpl+ and Simpl Windows formats. Using the code for Simpl Windows, the analog output showed 0 for ProjectorLampHours, but using the code for Simpl+, the